Compatible with Raspberry Pi Zero, 3B, 3B+ and Raspberry Pi 3A+, Maker pHAT is particularly suitable for makers, students and hobbyists that have little knowledge of basic electronics or that want to program immediately, avoiding wasting time connecting LEDs, buttons and buzzers.
It has an USB to serial chip converter, micro USB connector, 8 LED, 3 programmable push buttons, 1 active buzzer and Standard Raspb
The Tactigon is a small board (46.9×15.2×5.5 mm) governed by a 32bit ST microcontroller, equipped with BLE transceiver, temperature and pressure sensors, 9-axis IMU, LED RGB, charge controller for Li battery -ion with which it is powered, GROVE standard connector with UART and 5 GPIO. Thanks to this board it…
Here we are, a great year full of innovations and open source project is passing by and we would like to celebrate with you this magic moment! As usual in this period, it’s time to take stocks of the work done so far, so here are the most visited posts on Open Electronics. Top 5…
Basic board to create, in combination with the FT1308M and FT1128M (not included), a complete GPRS modem to make data connections, calls, send sms. For example, it allows the use of GPS / GSM or GSM-only locators in point-to-point mode so as to instantly obtain positioning data and then follow movements directly. It allows direct…
ABS Handheld Electronics Enclosure with rounded corners and plastic panel. Shiny surfaces. External dimensions: 125 x 70 x 39h mm. Internal dimensions: 120 x 63 mm. Go to Open-Electronics Store Build it yourself Boards, sensors and kits for projects like this one. Browse the shop
Original device, IR (38 kHz) and Wi-Fi that allows installing the “Smart Life or Tuya Life” App to transform your smartphone / tablet into a single remote control capable of replacing all the IR remote controls used to control air conditioners air, TV, fans, DVDs and many other devices. It can be controlled both via…
The NX8048T070 is a display of the NEXTION family that differs from the traditional display due to the presence of a microcontroller, a flash memory, a slot for inserting an SD card containing the firmware of your project, a 4-pin TTL serial interface and a free software (Nextion Editor) specifically designed to draw the graphic…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
