‘PASSION’ FRAGRANCE FOR SMOKE FLUID
€5.33excl. VAT€6.50incl. VATFluid for scenting the smoke emitted by smoke machines (8220-VDLSL1, 8220-VDLSL5, 8220-VDLSLH5, 8220-VDLSLHT5)
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Smoke, bubble & snow machines -
Smoke, bubble & snow machines‘TUTTI FRUTTI’ Fragrance for Smoke Fluid
€5.33excl. VAT€6.50incl. VATFluid for scenting the smoke produced by smoke machines (8220-VDLSL1, 8220-VDLSL5, 8220-VDLSLH5, 8220-VDLSLHT5)
-
Educational kits“Easter Bunny” PCB Kit with Light-Up Ears – Solder-It-Yourself Board
€0.82excl. VAT€1.00incl. VAT*The Easter Bunny PCB is free when you buy the components listed below.
-
Smoke, bubble & snow machines“ENERGY” FRAGRANCE FOR SMOKE FLUID
€5.33excl. VAT€6.50incl. VATLiquid that scents the smoke put out by smoke machines (8220-VDLSL1, 8220-VDLSL5, 8220-VDLSLH5, 8220-VDLSLHT5)
-
LED strips -
Sensors“S” type load cell – 100 kg range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 100 kg range and two M12 threaded holes
-
Sensors“S” Type Load Cell – 500 kg Range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 500 kg range and two M12 threaded holes
-
Sensors“S”-type load cell, 200 kg range
€52.46excl. VAT€64.00incl. VATS-type load cell made of stainless steel, C3 accuracy class, 200 kg range and two M12 threaded holes
-
Accessories“U” bracket for the G15 Cube Servo
€3.28excl. VAT€4.00incl. VAT“U” bracket that, combined with the G15 Cube Servo, lets you build moving joints for robots, such as multi-joint robotic arms and so on
-
Voltage regulators+24V regulator – 1.5A – TO220
€1.23excl. VAT€1.50incl. VAT+24 V/1.5 A voltage regulator in TO220 package.
-
Bench power supplies0-30 V / 0-10 A laboratory power supply
€97.54excl. VAT€119.00incl. VATSwitching laboratory power supply with output voltage adjustable from 0 to 30 VDC and a maximum current of 10 A
-
Speakers, buzzers & mics0.3 W / 8 Ohm Speaker – Ø 57 mm
€2.30excl. VAT€2.80incl. VATResponse from 380 to 4,500 Hz and 88 dB sensitivity, with a neodymium magnet: made for places where space is tight but the sound still has to carry.
-
Soldering0.4 mm curved replacement tip
€8.11excl. VAT€9.90incl. VATIT02BS curved tip, 0.4 mm, designed for precision soldering on PCBs and SMD components. Compatible with the HS02BS1 soldering iron, offering stability and long service life.
-
Soldering0.4 mm replacement tip for TP237, TP240, SS204 and VTSS230
€2.30excl. VAT€2.80incl. VAT0.4 mm replacement tip for the TP237 and TP240 adjustable soldering stations and for the VTSS230 station
-
Cable reels0.5 mm Hook-up Wire – 100 m Reel – Black
€18.77excl. VAT€22.90incl. VATReel of single-conductor tinned copper wire
-
Soldering0.5 mm tip for VTSSC50N
€2.62excl. VAT€3.20incl. VAT0.5 mm replacement tip for the VTSSC50N soldering station.
-
Displays0.56″ 4-Digit 7-Segment Display, Common Anode – Red
€1.23excl. VAT€1.50incl. VAT0.56″ 4-digit red LED display, common anode, compact and highly readable, ideal for electronic instrumentation and measurement applications.
-
Displays0.91” I2C OLED Display, 128×32 pixel
€4.84excl. VAT€5.90incl. VATModule with a 0.91” OLED (Organic Light Emitting Diode) display, 128×32 pixel, blue, I²C interface, SSD1306 graphics controller, viewing angle about >160°, ready to connect to Arduino
-
Displays0.95-inch Color OLED Display
€12.70excl. VAT€15.50incl. VATRGB OLED (Organic Light Emitting Diode) display, 0.95″
-
Special functions1 IN – 4 OUT USB 2.0 High Speed hub chip
€2.87excl. VAT€3.50incl. VATThe FE1.1s chip is a high-performance, low-power integrated circuit that lets you build a USB 2.0 hub with 4 output ports and their status LEDs