10″ resistive touchscreen display – 1024×600 pixels
€105.74excl. VAT€129.00incl. VAT10.1-inch colour display with resistive touchscreen, HDMI video input and a resolution of 1024×600 pixels
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Displays -
Displays11.9″ capacitive touch screen display with audio output – 320 x 1480 pixels
€113.93excl. VAT€139.00incl. VAT11.9″ HDMI capacitive touchscreen display with 320×1480 resolution, IPS panel, 6H tempered glass and HDMI+USB interface. Compatible with Raspberry Pi, PC and Jetson Nano.
-
Games2 Player Arcade Game Set
€48.36excl. VAT€59.00incl. VATThis set lets you build a two-player arcade video game station like the ones found in bars and amusement arcades in the ’80s and ’90s
-
Raspberry Pi2-Channel DC Motor Driver for Raspberry Pi B+
€9.43excl. VAT€11.50incl. VATDesigned to work together with the Raspberry Pi model B+, this small driver, built around the Texas Instruments DRV8835 chip, can drive two DC motors in both directions, or a single stepper motor
-
Displays2.9″ NFC e-Ink display, no battery
€36.89excl. VAT€45.00incl. VAT2.9″ e-Paper module powered over NFC, ideal for electronic labels, device identification, showing static information or inventory management, all without any power source.
-
Lab cables20 cm Male-Female 40-Way Flat Cable
€1.64excl. VAT€2.00incl. VATFlat cable approximately 20 cm long, with a 2×20 pin male connector on one end and a 2×20 pin female connector on the other
-
Raspberry Pi3-Channel Relay Board for Raspberry Pi
€15.57excl. VAT€19.00incl. VATThe RPi relay board is a compact add-on for the Raspberry Pi (A+ / B+ / 2B / 3B / 3B+) with 3 high-quality relays rated for loads up to 250 VAC/5 A and 30 VDC / 5 A, one optocoupler (PC817) per input, LEDs showing relay and power status, and 3 jumpers that let you drive the relays straight from the Raspberry Pi or from another device
-
Displays3.5″ Touch Display for Raspberry
€26.23excl. VAT€32.00incl. VAT3.5″ color TFT LCD display for Raspberry Pi
-
Raspberry Pi4-port USB Hub for Raspberry Pi
€9.43excl. VAT€11.50incl. VAT4-port USB hub for Raspberry Pi with a USB / UART converter for serial communication
-
Displays4.3 inch touch screen display 800×480
€60.66excl. VAT€74.00incl. VAT4.3″ colour IPS (In-Plane Switching) display with capacitive touch screen for Raspberry Pi (which can be mounted directly on the back)
-
Lab cables40-Way Male-Female Ribbon Cable, 40 cm
€2.38excl. VAT€2.90incl. VATRibbon cable about 40 cm long with a 2×20-pin male connector at one end and a 2×20-pin female connector at the other
-
Raspberry Pi5 Megapixel Camera for Raspberry Pi
€19.67excl. VAT€24.00incl. VATColour camera for Raspberry Pi, compatible with the original module
-
Raspberry Pi5 Mpx Camera for Raspberry Pi
€7.79excl. VAT€9.50incl. VATSmall module for the Raspberry Pi with a 5 megapixel camera (Omnivision 5647)
-
Mains power supplies5 VDC / 3 A Power Supply with Type C Output and Switch
€9.43excl. VAT€11.50incl. VATSwitching power supply with 5 VDC – 3 A output, cable with in-line switch and Type C output connector
-
Mains power supplies5 Vdc / 3 A Switching Power Supply with Micro USB Output
€9.84excl. VAT€12.00incl. VATUltra-compact switching power supply (80×43.2×24.6 mm) with a 5 V – 3 A output and a micro USB connector
-
Displays5″ Touch Screen Display – 800×480 pixels
€29.51excl. VAT€36.00incl. VAT5″ colour display with resistive touch screen, HDMI video input and a resolution of 800×480 pixels
-
Displays5” resistive touch screen display 800×480
€48.36excl. VAT€59.00incl. VATIt connects to the Raspberry Pi over HDMI and sends the touch data over micro USB; it has a switch to turn the backlight off. Raspberry not included.
-
PC storage64GB SD Card with RetroPie System
€13.85excl. VAT€16.90incl. VAT64GB micro SD card loaded with our build of RetroPie
-
Displays7″ QLED Touchscreen Display – 1024×600 Pixels
€77.05excl. VAT€94.00incl. VATQLED (QUANTUM DOT LED) colour display, 7 inches, with capacitive touchscreen, tempered glass, HDMI video input and a resolution of 1024×600 pixels.
-
Raspberry Pi8 Megapixel Camera Module for Raspberry Pi
€36.07excl. VAT€44.00incl. VATSmall Raspberry Pi module with an 8 megapixel Sony IMX219PQ image sensor and fixed 1/4″ optics