Set of 200 Resistors 1/4 W 5.6 ohm
€2.87excl. VAT€3.50incl. VATSet of 200 resistors, 5.6 ohm, 1/4 watt, 5% – carbon film.
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Resistors -
Resistors
Set of 200 Resistors 1/4 W 4.7 ohm
€2.87excl. VAT€3.50incl. VATSet of 200 resistors, 4.7 ohm, 1/4 watt, 5% – carbon film.
-
Resistors
Set of 200 Resistors 1/4 W 2.7 ohm
€2.87excl. VAT€3.50incl. VATSet of 200 resistors, 2.7 ohm, 1/4 watt, 5% – carbon film.
-
SensorsMQ-7 Gas Sensor Board
€5.57excl. VAT€6.80incl. VATDetects carbon monoxide between 20 and 2,000 ppm, with analogue and digital outputs and a threshold trimmer; 2.5 to 5 Vdc supply.
-
SensorsGAS sensor board – MQ-2
€5.57excl. VAT€6.80incl. VATCompact board built around a high-sensitivity semiconductor smoke sensor, with a wide detection range, fast response, good stability and a long service life
-
SensorsSoil Moisture Sensor Board
€3.69excl. VAT€4.50incl. VATPCB probe with analogue output that, when connected to an Arduino or another microcontroller, measures the soil moisture percentage, for example in a flower pot
-
SensorsHMMD 24 GHz Motion Sensor – Micro-Motion Radar
€4.51excl. VAT€5.50incl. VAT24 GHz mmWave radar sensor for accurate detection of human micro-motion, even when the person is standing still. HMMD technology, compatible with Arduino, ESP32, Raspberry Pi and Jetson Nano. Ready to use, ideal for smart projects.
-
SensorsMagnetic Sensor Board
€5.57excl. VAT€6.80incl. VATBased on the Freescale MAG31110 chip, this compact board measures magnetic fields
-
SensorsLiquid Level Sensor Board – 48 mm sensing depth
€3.69excl. VAT€4.50incl. VATImmersed in a liquid it returns a voltage proportional to the level, down to a depth of 48 mm; it runs on 2 to 5 Vdc.
-
SensorsST188 IR Reflective Obstacle Sensor Board
€4.26excl. VAT€5.20incl. VATModule fitted with a reflective infrared sensor (ST188), an LM393 voltage comparator, a sensitivity adjustment trimmer and both analogue and digital outputs
-
SensorsIR proximity sensor
€4.10excl. VAT€5.00incl. VATProximity sensor built around a voltage comparator chip, an infrared transmitter and an infrared receiver, with a trimmer for sensitivity adjustment, analogue and digital outputs and two status LEDs for power and output signal
-
D-sub & DVI cablesUSB to RS232 DB9 adapter – 1.5 m
€13.52excl. VAT€16.50incl. VATUSB–RS232 converter with a female DB9 connector, built around the FTDI FT232RNL chip, designed for stable, reliable serial communication in industrial and professional applications.
-
SensorsUV Sensor Board 200-370 nm
€9.43excl. VAT€11.50incl. VATSmall module fitted with a sensor able to measure the UV intensity of sunlight, lamps or other sources, with a wavelength between 200 nm and 370 nm
-
Raspberry Pi4-port USB Hub for Raspberry Pi
€9.43excl. VAT€11.50incl. VAT4-port USB hub for Raspberry Pi with a USB / UART converter for serial communication
-
Raspberry PiRP2040 Mini Development Board
€4.75excl. VAT€5.80incl. VATUltra-compact development board with a dual-core RP2040 microcontroller, USB-C and multiple GPIOs, ideal for embedded, IoT, automation and electronics prototyping projects.
-
Sale!
Raspberry PiMulticolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VATMulticolour case for Raspberry Pi 2 and Raspberry Pi 3 Model B and B+. It goes together simply by stacking the 8 layers it is made of and closing everything with 4 nylon screws.
-
Raspberry PiM.2 NVMe SSD Adapter Board for Raspberry Pi 5
€10.66excl. VAT€13.00incl. VATPCIe-to-M.2 adapter board for Raspberry Pi 5, designed to connect high-speed NVMe SSDs through the PCIe interface.
-
ArduinoOV7670 – 0.3 MP Digital Camera Module for Arduino
€7.30excl. VAT€8.90incl. VATColour camera module built around a 1/4″ Omnivision OV7670 CMOS image sensor of 0.3 Megapixel (640×480 pixels), fixed 1/6″ lens with a 25° field of view, output formats: YUV, YCB, RGB and RGB Raw
-
SensorsMotion sensor board with mercury switch
€3.69excl. VAT€4.50incl. VATMotion sensor using a mercury switch
-
Raspberry PiLoRa HAT for Raspberry Pi – 433 MHz
€27.87excl. VAT€34.00incl. VATDesigned to work with Raspberry Pi and based on the SX1268 module at 433 MHz, the LoRa HAT provides two-way data transmission up to 5 km over the serial port. It supports automatic retransmission, low-power modes such as deep sleep and Wake on Radio (ideal for battery-powered applications), wireless parameter configuration, RSSI signal strength indication and the LBT function, which can be used to avoid interference. It has a 40-pin GPIO connector for Raspberry Pi, a CP2102 chip for serial debugging, a UART control port for connecting host boards such as Arduino / STM32 and 4 status LEDs: UART RXD and TXD, AUX and PWR.