Counts based on the first 4198 matches.
Raspberry PiThe Pico Primer Kit for Raspberry Pi is a kit built around the Raspberry Pi Pico, offering a wide range of sensors and actuators together with detailed tutorials for an immediate plug&play experience.
Relays & coils
Displays4,096 individually addressable LEDs for text and animations: it measures 192 x 192 mm and daisy-chains to further identical panels.
ArduinoBased on the RFM95W transceiver module at 868 MHz, this shield for Arduino, Fishino and compatible boards (not included – see related products) provides long-range bidirectional data transmission using LoRa™ technology
SensorsSet consisting of an interface board and a 20 kg load cell mounted inside a mechanical frame. The board is based on the HX711 chip, a 24-bit analogue-to-digital converter designed to connect the load cell to a microcontroller such as Arduino, Fishino or compatible boards
LoRa modulesCompact 868 MHz RF transceiver module based on the RF96 chip
Access controlPre-assembled 125 kHz RFID reader (only the jumper connector needs soldering) with status LED, external antenna and TTL and UART communication interface
Control electronicsCompact module based on the LM393 chip, fitted with a reed contact (single normally open contact), a sensitivity adjustment trimmer and status LEDs for power and output signal
Raspberry PiIncludes the Pico W, a base board with display and eight plug-in modules: designed for learning MicroPython with no soldering at all.
Battery holders
DisplaysModule with a 128×64 pixel blue OLED (Organic Light Emitting Diode) display, I²C interface, SH1106 graphic controller, viewing angle approx. 160°
DisplaysThe NX4832T035 is a NEXTION family display that differs from conventional displays thanks to an on-board microcontroller, flash memory, a card slot for the SD card holding your project firmware, a 4-pin TTL serial interface and free software (Nextion Editor) written specifically to design the graphics (buttons, progress bars, images, text, etc.). It offers 16 MB of flash memory, a 3.5″ resistive touch screen, 480×320 pixel resolution and 65,536 colours.
BNCAdapter used in audio/video work to go from equipment with a BNC socket to RCA equipment.
USB connectorsSolders onto the PCB to build a dongle that plugs straight into the computer’s USB port or into an extension lead.
Jack connectorsPanel-mount 6.35 mm stereo jack socket with 17 mm mounting pitch.
SensorsMade up of a probe with two metal terminals and a small module based on the LM393 IC, it measures the moisture content of the soil, for example in a flower pot
USB connectors16-contact female socket, surface-mounted on the board edge, with through-hole anchoring pins.
SensorsTemperature and humidity sensor based on the Sensirion CMOSens® SHT20 4C
Jack connectorsPanel-mount 3.5 stereo jack socket with solder contacts.
Pin headersPair of 3-pole male/female connectors for cables with a cross-section between 0.5 and 2.1mm
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
