Narrow by category
Counts based on the first
4198 matches.
Showing 21–40 of 4198 resultsSorted by latest
-
Raspberry Pi
€34.43excl. VAT€42.00incl. VAT
Designed to be used with Raspberry Pi and based on the SX1262 module at 868 MHz, this LoRa HAT provides two-way data transmission over a range of up to 5 km through the serial port. It supports automatic repeating, low-power features such as deep sleep and Wake on Radio (ideal for battery-powered applications), wireless parameter configuration, RSSI signal strength indication and the LBT function, which can be used to avoid interference. It features a 40-pin GPIO connector for Raspberry Pi, a CP2102 chip for serial debugging, a UART control port for connecting host boards such as Arduino / STM32 and 4 status LEDs: UART RXD and TXD, AUX and PWR.
-
Motors
€3.20excl. VAT€3.90incl. VAT
Ideal for any application that calls for precise angular positioning and rotation speed, such as robotics and servo mechanisms.
-
Raspberry Pi
€15.98excl. VAT€19.50incl. VAT
The Stack HAT for Raspberry Pi is an I/O expansion board that lets you use up to 5 different HATs at the same time
-
Function generators
€278.69excl. VAT€340.00incl. VAT
The PSG9080 is a high-performance signal generator, ideal for creating sine, square, triangle, pulse and custom waveforms, with a wide frequency range and advanced modulation. Perfect for laboratories and professional electronics applications.
-
Special test instruments
€27.87excl. VAT€34.00incl. VAT
Electronic component tester with a 3.5″ colour LCD display, infrared receiver and built-in 3.7 volt 350 mAh rechargeable battery
-
Raspberry Pi
€23.77excl. VAT€29.00incl. VAT
Colour camera for Raspberry Pi Zero, compatible only with version V1.3
-
Buttons, switches & joysticks
€8.85excl. VAT€10.80incl. VAT
Based on the TTP229-LSF chip, this board lets you build a compact 16-key touch keypad for use with Raspberry Pi. The system recalibrates itself automatically when none of the keys is touched for more than 4 seconds.
-
Raspberry Pi
€19.67excl. VAT€24.00incl. VAT
Colour camera for Raspberry Pi, compatible with the original module
-
Raspberry Pi
€7.79excl. VAT€9.50incl. VAT
Set containing a black and white acrylic case, purpose-made and drilled to house a Raspberry Pi 4, a cooling fan, four mini heatsinks, four rubber feet and a screwdriver.
-
Control electronics
€1.64excl. VAT€2.00incl. VAT
Built around a micro switch and a status LED, this small board is ideal for use as an anti-collision sensor on robots
-
DC/DC converters
€2.87excl. VAT€3.50incl. VAT
Cable with a step-up DC/DC converter built into a USB connector
-
DC/DC converters
€52.46excl. VAT€64.00incl. VAT
This programmable module lets you set a constant output voltage or current, pairing analogue integration with digital controls
-
Oscilloscopes & dataloggers
€64.75excl. VAT€79.00incl. VAT
DSO-200 handheld oscilloscope: 1 channel, 200 kHz, 99x69x20 mm. 2.8″ LCD display for clear readings. Lithium battery, USB-C charging. Handy fold-out stand. Probe and USB-C charging cable included.
-
ESP8266 / ESP32
€27.87excl. VAT€34.00incl. VAT
Complete ESP32-C6-Zero kit for learning and developing IoT projects, with Wi-Fi 6, sensors and on-board peripherals.
-
Ethernet devices
€64.75excl. VAT€79.00incl. VAT
16-channel relay module with dual Ethernet interface, Modbus TCP/RTU support, PoE and DIN-rail enclosure.
-
LEDs
€0.66excl. VAT€0.80incl. VAT
Yellow LED that mimics the flickering flame of a candle
-
Accessories
€3.69excl. VAT€4.50incl. VAT
Simple board with 5 push-buttons and analogue output
-
Sensors
€6.15excl. VAT€7.50incl. VAT
Built around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
-
LEDs
€0.90excl. VAT€1.10incl. VAT
At first glance it may look like an ordinary 8 mm RGB LED, but it is not!
-
ESP8266 / ESP32
€11.48excl. VAT€14.00incl. VAT
Compact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIOs.
