Narrow by category
Counts based on the first
4198 matches.
Showing 41–60 of 115 results
-
Raspberry Pi
€18.03excl. VAT€22.00incl. VAT
Plastic case containing an ABS breadboard with 830 contacts and self-adhesive base, a flat cable about 20 cm long with a 2×20 pin female connector at each end, a Breadboard adapter for Raspberry Pi (lets you connect a Raspberry Pi board to an ordinary breadboard with a flat cable), a backlit LCD display with 16 characters x 2 lines, a module with a DS18B20 temperature sensor, a module with an infrared receiver, an infrared remote control, 20 resistors 1/4 w 220 ohm, 1 strip of 40 pins with 2.54mm pitch, 6 female/female jumper leads, 65 leads in various colours and lengths terminated at both ends with a 1-pole male connector, 1 linear potentiometer 10 kohm, 6 normally open square pushbuttons (mm 12x12x7.3), 7 LEDs (1 RGB / 2 yellow / 2 red / 2 green)
-
Raspberry Pi
€8.11excl. VAT€9.90incl. VAT
Plastic enclosure for DIN rail mounting, with a clear window and cut-outs made to house the Raspberry Pi B+ / 3B and 3B+
-
Raspberry Pi
€8.11excl. VAT€9.90incl. VAT
Plastic enclosure for DIN rail mounting, with a clear window and cut-outs made specifically to house the Raspberry Pi 4
-
Displays
€17.21excl. VAT€21.00incl. VAT
Original round color display (RGB 65K), 1.8″
-
Raspberry Pi
€17.21excl. VAT€21.00incl. VAT
Shield for Raspberry Pi based on the DRV8825 stepper motor driver and the ULN2003 line-driver chip
-
Raspberry Pi
€12.30excl. VAT€15.00incl. VAT
Semi-transparent plastic enclosure made to house the Raspberry PI model B+ and the Raspberry Pi 2 type B
-
Raspberry Pi
€5.57excl. VAT€6.80incl. VAT
This black plastic enclosure houses the Raspberry Pi Camera Module and can be simply set down or fixed to any surface with hook-and-loop tape or a screw
-
Displays
€17.21excl. VAT€21.00incl. VAT
EPAPERHAT is an e-Paper or Paper Ink (electrophoretic) display with a built-in graphic controller and a connector for use with Raspberry Pi 2B / 3B / 3B+ / Zero / Zero W
-
Displays
€68.03excl. VAT€83.00incl. VAT
7,5” e-Paper or Paper Ink (electrophoretic) display with black and white characters, two grey levels, and a connector for use with Raspberry Pi and Jetson Nano
-
Displays
€20.49excl. VAT€25.00incl. VAT
e-Paper or Paper Ink display (electrophoretic), active matrix TFT
-
Raspberry Pi
€15.57excl. VAT€19.00incl. VAT
Ideal for use with Raspberry Pi (Raspberry Pi 3 B+, Raspberry Pi 3 B, Raspberry Pi 2 type A+, Raspberry Pi 2 type B+ and Raspberry Pi 2 type B), it carries connectors for the UART, SPI and I2C interfaces, a connector for an LCD16x2 display, a Raspberry Pi GPIO connector, 4 user-configurable buttons and 4 LEDs, buzzer, trimmer, RTC and a USB to UART converter
-
Raspberry Pi
€4.02excl. VAT€4.90incl. VAT
Flexible cable for use with Raspberry Pi cameras or monitors
-
Raspberry Pi
€32.70excl. VAT€39.90incl. VAT
GSM/GPRS/GNSS board for Raspberry Pi based on the SIM868 module
-
Raspberry Pi
€89.34excl. VAT€109.00incl. VAT
Built around the SIM7600E-H 4G/3G/2G communication and GNSS positioning module, this board can be connected to a computer to browse the Internet or to a Raspberry Pi to add high-speed 4G connectivity, wireless communication, voice calls, SMS, global positioning and more
-
Raspberry Pi
€12.30excl. VAT€15.00incl. VAT
Active cooling solution for Raspberry Pi 5, made up of a large metal heatsink and a variable-speed fan. It ensures effective heat dissipation, reducing the risk of overheating and extending the device’s life. Installation is simple thanks to the dedicated connectors.
-
Raspberry Pi
€23.77excl. VAT€29.00incl. VAT
Heatsink with cooling fan made specifically for the Raspberry Pi
-
Raspberry Pi
€32.70excl. VAT€39.90incl. VAT
Small IR-filter-free module for Raspberry Pi with an 8 megapixel Sony IMX219PQ image sensor and fixed 1/4″ optics
-
Raspberry Pi
€28.69excl. VAT€35.00incl. VAT
Module for Raspberry Pi with a camera sensitive to infrared radiation, 1/4″ Omnivision OV5647 sensor with 5 megapixel resolution, 3.6 mm focal length, 75.7° field of view and 2 3-watt LEDs with infrared emission (850 nm)
-
Raspberry Pi
€27.87excl. VAT€34.00incl. VAT
Designed to work with Raspberry Pi and based on the SX1268 module at 433 MHz, the LoRa HAT provides two-way data transmission up to 5 km over the serial port. It supports automatic retransmission, low-power modes such as deep sleep and Wake on Radio (ideal for battery-powered applications), wireless parameter configuration, RSSI signal strength indication and the LBT function, which can be used to avoid interference. It has a 40-pin GPIO connector for Raspberry Pi, a CP2102 chip for serial debugging, a UART control port for connecting host boards such as Arduino / STM32 and 4 status LEDs: UART RXD and TXD, AUX and PWR.
-
Raspberry Pi
€34.43excl. VAT€42.00incl. VAT
Designed to be used with Raspberry Pi and based on the SX1262 module at 868 MHz, this LoRa HAT provides two-way data transmission over a range of up to 5 km through the serial port. It supports automatic repeating, low-power features such as deep sleep and Wake on Radio (ideal for battery-powered applications), wireless parameter configuration, RSSI signal strength indication and the LBT function, which can be used to avoid interference. It features a 40-pin GPIO connector for Raspberry Pi, a CP2102 chip for serial debugging, a UART control port for connecting host boards such as Arduino / STM32 and 4 status LEDs: UART RXD and TXD, AUX and PWR.
