INFRARED LEDs TX + RX
€2.05excl. VAT€2.50incl. VATPack containing one infrared emitter and one infrared receiver
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
LEDs -
LEDsLED 10 W GREEN 525 nm
€3.11excl. VAT€3.80incl. VATHigh-brightness green Super LED, 10 watt power, over 50,000 hours of operation
-
LEDsLED 10 W ORANGE
€3.11excl. VAT€3.80incl. VATHigh-brightness orange super LED, 10 watt power, over 50,000 hours of operation
-
LEDs -
LEDsLED Light Tree – Warm White
€3.20excl. VAT€3.90incl. VATCOB LED light tree coated in silicone, sturdy and safe, requiring only a 3V power supply, with no need for heat sinks thanks to its low heat output. Warm white light, ideal for creating stunning decorations and a cozy atmosphere.
-
LEDsLED light-up butterfly – Warm white
€3.20excl. VAT€3.90incl. VATSilicone-coated COB LED light-up butterfly, sturdy and safe, needs only 3V power, no heatsinks required thanks to low heat output. Warm white light, perfect for creating stunning decorations and a cosy atmosphere.
-
LEDsLED light-up dragonfly – Warm white
€3.20excl. VAT€3.90incl. VATThe COB LED dragonfly is protected by silicone, tough and safe. It needs only a 3V supply and no heatsink, thanks to how little heat it gives off. Its warm white light is ideal for making decorative lighting.
-
LEDsLED star light – Warm white
€3.20excl. VAT€3.90incl. VATThe COB LED Star is protected by silicone, tough and safe. It needs only 3V to run and requires no heatsink thanks to its low heat output. It gives a warm white light, ideal for making light-up decorations.
-
LEDsMetal LED Holder for 3mm LEDs
€0.20excl. VAT€0.25incl. VATMetal LED holder for 3mm diameter LEDs with a plastic locking part.
-
LEDsMetal LED Holder for 5 mm LEDs
€0.25excl. VAT€0.30incl. VATMetal LED holder for 5 mm LEDs, with a plastic part for locking.
-
LEDsNano NeoPixel LED with WS2812B Chip – 2.4 x 2.7 mm
€0.61excl. VAT€0.75incl. VATIncredibly small surface-mount NeoPixel LED (2.4 mm x 2.7 mm x 1.1 mm), half the size of a 3535 NeoPixel and a quarter of a 5050. Inside it carries the WS2812B chip, which lets you daisy-chain many of these LEDs using just 1 control pin
-
LEDs -
LEDsOrange LED indicator – 12-24 VDC 6 mm
€2.05excl. VAT€2.50incl. VATIndicator light built around a high-brightness orange LED, complete with metal LED holder and supply leads
-
LEDsPlastic LED holder for 10 mm LEDs
€0.33excl. VAT€0.40incl. VATPlastic LED holder for LEDs of 10 mm diameter.
-
LEDsPLASTIC LED HOLDER FOR 3 MM LEDS
€0.16excl. VAT€0.20incl. VATABS LED holder for 3 mm diameter LEDs.
-
LEDsPLASTIC LED HOLDER FOR 5 MM LED
€0.20excl. VAT€0.25incl. VATPlastic LED holder for 5 mm diameter LEDs.
-
LEDsPlastic LED Holder for 8 mm LEDs
€0.33excl. VAT€0.40incl. VATPlastic LED holder for LEDs of 8 mm diameter.
-
LEDsProgrammable 24 x WS2812 RGB LED Ring – 85.8mm Diameter
€4.51excl. VAT€5.50incl. VATNeopixel ring made up of 24 individually programmable RGB LEDs, each able to produce 256 shades of colour, for a total of over 16 million colours.
-
LEDsRainbow-Shaped COB LED – Creative Lighting for DIY Projects
€3.77excl. VAT€4.60incl. VATCreate a magical atmosphere with this rainbow-effect mini COB LED, ideal for creative and DIY projects. Easy to hook up with crocodile clips or by soldering, this LED adds a warm, eye-catching touch of light to your projects.
-
LEDsRed LED 5 mm
€0.08excl. VAT€0.10incl. VATIndicator diode with a 60-degree beam angle and 10 mcd intensity, for pilot lights on panels and PCBs.