Capacitive moisture sensor for plants
€11.07excl. VAT€13.50incl. VATBased on capacitive moisture sensing and powered by a CR2032 battery (3 volts), this sensor is used as a watering alarm for plants
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Sensors -
SensorsCarbon Monoxide Sensor
€3.69excl. VAT€4.50incl. VATSensor able to detect the presence of Carbon Monoxide (CO) in the air at concentrations between 20 and 2,000 ppm
-
SensorsCCS811 Air Quality Module
€22.95excl. VAT€28.00incl. VATCompact breakout board based on AMS’s CCS811 air-quality sensor.
-
SensorsClamp Current Sensor (30 A max)
€9.02excl. VAT€11.00incl. VATClamp current sensor that measures AC currents without having to break into the cable to read the current drawn.
-
SensorsCO2 Sensor Module – MH-Z19B
€48.36excl. VAT€59.00incl. VATMeasures carbon dioxide from 0 to 5,000 ppm with NDIR infrared sensing and reports it on UART and PWM outputs; runs on 5 V.
-
SensorsCO2 sensor module – MH-Z19C
€40.16excl. VAT€49.00incl. VATIntegrate the MH-Z19C sensor into your projects. Lets you monitor CO2 concentration in indoor environments simply and efficiently.
-
Presence & intrusion sensorsCompact PIR Sensor with TTL Output – Adjustable Range up to 7m
€4.10excl. VAT€5.00incl. VATCompact PIR sensor with control board and TTL output (high level 3.3V – low 0V)
-
SensorsCompressed Natural Gas (CNG) sensor
€2.46excl. VAT€3.00incl. VATSensor able to detect natural gas (mainly methane) in the air at concentrations between 300 and 10,000 ppm
-
SensorsCurrent Transformer 5 A
€5.33excl. VAT€6.50incl. VATGalvanically isolated current measuring transformer, for use wherever you need to sense current draw without electrical contact with the low-voltage circuit.
-
SensorsD203S motion sensor module
€4.10excl. VAT€5.00incl. VATCompact PIR sensor with motion detection up to 5 metres and a 120° angle, ideal for automation, security and home-automation projects.
-
SensorsDHT11 Temperature and Humidity Sensor
€2.87excl. VAT€3.50incl. VATThe DHT11 is a temperature (0°C to +50°C) and relative humidity (20% to 90%) sensor. It has a single-wire serial interface that makes it easy to use
-
SensorsDHT11 Temperature and Humidity Sensor Board
€3.69excl. VAT€4.50incl. VATThree-pin output module with DHT11 sensor
-
SensorsDHT22 temperature and humidity sensor
€7.38excl. VAT€9.00incl. VATThe DHT22 is a temperature (-40°C to +80°C) and relative humidity (0% to 100%) sensor. Its single-wire serial interface makes it easy to use
-
SensorsDigital Temperature Sensor – LMT01
€3.11excl. VAT€3.80incl. VAT2-pin digital temperature sensor (TO-92 case) from Texas Instruments
-
SensorsDS18B20 temperature sensor – assembled board
€8.20excl. VAT€10.00incl. VATBreakout board based on the Maxim Dallas DS18B20 semiconductor temperature sensor (TSSOP version)
-
SensorsDual Liquid Level Sensor – 200 mm
€12.30excl. VAT€15.00incl. VATMade of stainless steel and fitted with two floats, one for the minimum level and one for the maximum level, this float switch is used to detect the level of a liquid inside a tank and can switch on a pump, a warning light, an alarm or another device
-
SensorsDual Speed Sensor for Motors
€6.56excl. VAT€8.00incl. VATMade up of two optical encoders and two discs to be fitted on the motor shaft, this set measures speed, providing 20 counts per full revolution
-
SensorsEarthquake Sensor Breakout Board – Omron D7S
€56.56excl. VAT€69.00incl. VATBreakout board built around the Omron D7S, the smallest seismic sensor in the world. The D7S contains a three-axis accelerometer, of which only two axes are used while an earthquake is being detected; they can be selected by the user or automatically, according to how the sensor is tilted.
-
SensorsElectronic Scale Kit with 20 kg Load Cell and HX711 Board
€22.95excl. VAT€28.00incl. VATSet consisting of an interface board and a 20 kg load cell mounted inside a mechanical frame. The board is based on the HX711 chip, a 24-bit analogue-to-digital converter designed to connect the load cell to a microcontroller such as Arduino, Fishino or compatible boards
-
SensorsEnergy Meter 100 A – TTL output
€20.49excl. VAT€25.00incl. VATThe readings can be taken over the TTL interface, using Arduino (or another microcontroller) or a PC, through a serial-to-USB converter.