ELEARDUKITMEGA – MEGA2560 Basic Kit
€40.16excl. VAT€49.00incl. VATStarter kit built around the MEGA2560 R3 board, aimed at makers, students and hobbyists.
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Arduino compatible -
DisplaysEPAPERHAT 2.13 inch e-Paper module 250×122
€17.21excl. VAT€21.00incl. VATEPAPERHAT is an e-Paper or Paper Ink (electrophoretic) display with a built-in graphic controller and a connector for use with Raspberry Pi 2B / 3B / 3B+ / Zero / Zero W
-
DisplaysEPAPERUART 2.9 inch e-Paper module 296×128
€20.49excl. VAT€25.00incl. VATe-Paper or Paper Ink display (electrophoretic), active matrix TFT
-
DisplaysEPAPERUART 4.3 inch e-Paper module 800×600
€72.95excl. VAT€89.00incl. VAT4.3 inch e-Paper or Paper Ink (electrophoretic) display with a resolution of 800 (H) x 600 (V) pixels
-
ESP8266 / ESP32ESP8266 Board, Arduino Compatible
€7.38excl. VAT€9.00incl. VATBuilt around the ESP8266 Wi-Fi module and with an Arduino Uno compatible form factor, this board lets you build applications that need Wi-Fi connectivity together with the ease of use of Arduino
-
ESP8266 / ESP32ESP8266 Wi-Fi Shield for Arduino
€13.11excl. VAT€16.00incl. VATAdds 2.4 GHz Wi-Fi connectivity to Arduino Uno and Mega through the ESP-12F module, with on-board TCP/IP stack and AT commands.
-
ESP8266 / ESP32ESPMINIMAL – Wi-Fi environmental sensor board
€11.07excl. VAT€13.50incl. VATBuilt around the ESP03 Wi-Fi module, this small, compact board (assembled and tested) measures the environmental parameters of a room, of a spot in your own home or of any other kind of building, and publishes the readings to the Cloud
-
ArduinoEthernet Shield for Arduino – Soldering Kit Version
€21.31excl. VAT€26.00incl. VATEthernet shield for Arduino in soldering kit version. Allows you to set up the Arduino board as a simple web server and connect to the LAN/web.
-
ESP8266 / ESP32Fingerprint Reader Module for M5FACESPOCKET
€27.46excl. VAT€33.50incl. VATFingerprint recognition module based on the FPC1020 capacitive sensor
-
FishinoFishino UNO Rev.2 – Board Based on the Arduino UNO ATmega328
€35.98excl. VAT€43.90incl. VATFishino UNO Rev.2 is a board based on the ATmega328pb with WiFi connectivity, a real time clock and a microSD card reader
Out of stock
Temporarily not available to order -
ArduinoFM Radio Shield for Arduino – Assembled
€31.97excl. VAT€39.00incl. VATFM radio shield with RDS for Arduino, with a 2.8 W class D amplifier
-
ArduinoGSM/GPRS Shield for Arduino
Price range: €19.50 through €35.50 incl. VATArduino shield designed to take the GSM/GPRS & GPS modules we offer, listed among the related products
-
FishinoGuppy – Fishino Nano Board
€31.97excl. VAT€39.00incl. VATFishino GUPPY is a board 100% compatible with the well-known Arduino NANO
-
ArduinoI/O Expansion Shield for Arduino Nano
€11.07excl. VAT€13.50incl. VATBrings out the various I/O pins of the Arduino Nano and uses the 3-pin Gravity interface (I/O pin with +5V and GND).
-
Arduino compatibleI/O Side Panel for Mini Lab
€30.33excl. VAT€37.00incl. VATThe input/output side panel is designed to be used as an add-on for the Totem Mini Lab
-
ArduinoIN/OUT shield for Arduino – 6 relays, 6 analogue and digital inputs
€24.18excl. VAT€29.50incl. VATIN/OUT shield for Arduino that lets Arduino drive 6 loads through relays and read the state of 6 analogue and 6 digital inputs
-
ArduinoIrrighino shield – kit
€10.66excl. VAT€13.00incl. VATThe Irrighino shield is an irrigation controller for Arduino that can be interfaced with a relay board
-
Arduino compatibleJolly Wi-Fi Module on UNO R3 Board
€24.51excl. VAT€29.90incl. VATJolly Wi-Fi module on an Arduino-compatible UNO R3 board
-
ESP8266 / ESP32Joystick Module for M5FACESPOCKET
€12.30excl. VAT€15.00incl. VATBased on the ATmega328 microcontroller, this module features a mini joystick with knob, 12 RGB LEDs and I²C communication (address: 0x5E)
-
ArduinoLCD keypad shield for Arduino
€10.57excl. VAT€12.90incl. VATShield for Arduino (Uno Rev3, Mega, Duemilanove and Leonardo) with a 16×2 LCD display, white characters, blue backlight, contrast trimmer, 6 buttons (Up, Down, Left, Right, Select and Reset) and pads for an ICSP connector