Component set for Raspberry Pi

Description

Plastic case containing an ABS breadboard with 830 contacts and self-adhesive base, a flat cable about 20 cm long with a 2×20 pin female connector at each end, a Breadboard adapter for Raspberry Pi (lets you connect a Raspberry Pi board to an ordinary breadboard with a flat cable), a backlit LCD display with 16 characters x 2 lines, a module with a DS18B20 temperature sensor, a module with an infrared receiver, an infrared remote control, 20 resistors 1/4 w 220 ohm, 1 strip of 40 pins with 2.54mm pitch, 6 female/female jumper leads, 65 leads in various colours and lengths terminated at both ends with a 1-pole male connector, 1 linear potentiometer 10 kohm, 6 normally open square pushbuttons (mm 12x12x7.3), 7 LEDs (1 RGB / 2 yellow / 2 red / 2 green). Weight: 304 grams. Particularly suited for use with Raspberry Pi.