1.8 inch display for MicroBit
€21.31excl. VAT€26.00incl. VATRGB display module with 65K colours designed for use with the micro:bit board, 1.8 inch diagonal, 160×128 pixels
Development systems
371 products
Narrow by category
-
micro:bit -
Arduino10 A Motor Shield for Arduino
€16.39excl. VAT€20.00incl. VATArduino shield based on an H-bridge made up of 4 NMOS transistors which, besides providing better efficiency, remove the need for a heatsink
-
Displays10″ resistive touchscreen display – 1024×600 pixels
€105.74excl. VAT€129.00incl. VAT10.1-inch colour display with resistive touchscreen, HDMI video input and a resolution of 1024×600 pixels
-
Displays11.9″ capacitive touch screen display with audio output – 320 x 1480 pixels
€113.93excl. VAT€139.00incl. VAT11.9″ HDMI capacitive touchscreen display with 320×1480 resolution, IPS panel, 6H tempered glass and HDMI+USB interface. Compatible with Raspberry Pi, PC and Jetson Nano.
-
Arduino16-Output I/O Expansion Board for Arduino
€11.48excl. VAT€14.00incl. VAT16-output I/O expansion board based on Microchip’s MCP23017 IC, able to communicate with Arduino via the I2C bus using dedicated libraries
-
IoT (Internet of Things)16×2 Display Expansion Board for the Mercury System
€18.85excl. VAT€23.00incl. VATExpansion board for the Mercury system carrying a 16×2 alphanumeric LCD display
-
Control electronics2 DC Motor / 1 Stepper Motor Driver Shield – 10 A
€26.23excl. VAT€32.00incl. VATArduino shield based on an H-bridge made up of 8 NMOS transistors which, besides improving efficiency, remove the need for a heatsink
-
Games2 Player Arcade Game Set
€48.36excl. VAT€59.00incl. VATThis set lets you build a two-player arcade video game station like the ones found in bars and amusement arcades in the ’80s and ’90s
-
micro:bit2 x AA battery holder with cover, switch and connector
€1.64excl. VAT€2.00incl. VATPlastic battery holder with cover, switch and 2 wires with connector for the Micro:bit board
-
micro:bit
2 x AAA battery holder with cover, switch and connector
€1.80excl. VAT€2.20incl. VATPlastic battery holder with cover, switch and 2 leads with a connector for the Micro:bit board
-
Raspberry Pi2-Channel DC Motor Driver for Raspberry Pi B+
€9.43excl. VAT€11.50incl. VATDesigned to work together with the Raspberry Pi model B+, this small driver, built around the Texas Instruments DRV8835 chip, can drive two DC motors in both directions, or a single stepper motor
-
Arduino2-Channel DC Motor Speed Control Shield
€11.48excl. VAT€14.00incl. VATArduino shield based on the L298P dual full-bridge driver, able to drive 2 DC motors (or one stepper motor) with a supply voltage between 4.8 and 24 VDC and a current of up to 2 A (2.5 A peak)
-
Arduino2.4” touch display shield for Arduino
€11.89excl. VAT€14.50incl. VATTouch display shield for Arduino built around a 2.4″ resistive TFT LCD display, ILI9341 graphic controller, 320×240 pixel resolution, 260,000 colours, SD card slot and SPI interface
-
Displays2.9″ NFC e-Ink display, no battery
€36.89excl. VAT€45.00incl. VAT2.9″ e-Paper module powered over NFC, ideal for electronic labels, device identification, showing static information or inventory management, all without any power source.
-
Lab cables20 cm Male-Female 40-Way Flat Cable
€1.64excl. VAT€2.00incl. VATFlat cable approximately 20 cm long, with a 2×20 pin male connector on one end and a 2×20 pin female connector on the other
-
IoT (Internet of Things)3-Channel Neopixel Board for the Mercury System
€11.48excl. VAT€14.00incl. VAT3-channel board that interfaces with Neopixel LED strips or rings
-
Raspberry Pi3-Channel Relay Board for Raspberry Pi
€15.57excl. VAT€19.00incl. VATThe RPi relay board is a compact add-on for the Raspberry Pi (A+ / B+ / 2B / 3B / 3B+) with 3 high-quality relays rated for loads up to 250 VAC/5 A and 30 VDC / 5 A, one optocoupler (PC817) per input, LEDs showing relay and power status, and 3 jumpers that let you drive the relays straight from the Raspberry Pi or from another device
-
ESP8266 / ESP323.5″ Parallel TFT Display with ESP32-S3
€72.95excl. VAT€89.00incl. VAT3.5-inch TFT display with a capacitive touch screen, ILI9488 graphics controller, ESP32-S3 module and SD card slot.
-
Displays3.5″ Touch Display for Raspberry
€26.23excl. VAT€32.00incl. VAT3.5″ color TFT LCD display for Raspberry Pi
-
Linux embedded4 GB Debian Micro SD Card for Arietta G25
€10.00excl. VAT€12.20incl. VAT4 GB Micro SDHC memory card with a Debian Linux distribution preinstalled for the Arietta-G25