Narrow by category
Counts based on the first
4198 matches.
Showing 1–20 of 112 results
-
Sensors
€4.84excl. VAT€5.90incl. VAT
Set made up of two TCRT5000 reflective sensors and a small control board based on the LM393 chip. When one of the sensors comes close to a light-coloured object, the strength of the received signal rises and the LED on the control board turns red (digital output high)
-
Sensors
€4.84excl. VAT€5.90incl. VAT
Built around the Allegro ACS712ELCTR-20A-T chip, this current sensor reads AC or DC currents between 0 and 20 A
-
Sensors
€1.23excl. VAT€1.50incl. VAT
Built around a voltage divider with two resistors, this voltage sensor scales the incoming voltage down by a factor of 5
-
Sensors
€4.51excl. VAT€5.50incl. VAT
Digital 3-axis accelerometer based on the Freescale MMA8452Q sensor
-
Sensors
€7.38excl. VAT€9.00incl. VAT
Small board based on the InvenSense MPU-6050 sensor, which contains a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer
-
Sensors
€4.02excl. VAT€4.90incl. VAT
Analog 3-axis accelerometer based on the ADXL345 chip by Analog Devices
-
Sensors
€4.02excl. VAT€4.90incl. VAT
Tilt sensor capable of detecting movement direction in four directions: forward, backward, left, right
-
Sensors
€3.69excl. VAT€4.50incl. VAT
With its Hall effect sensor and LM393 voltage comparator, this board is particularly suited to detecting a magnetic field
-
Sensors
€4.02excl. VAT€4.90incl. VAT
Based on the Allegro ACS712ELCTR-05B-T chip, this current sensor can measure AC or DC currents between 0 and 5 A
-
Sensors
€36.89excl. VAT€45.00incl. VAT
Compact breakout based on the AMS CCS811 air-quality sensor, the Bosch BMP280 digital pressure sensor and the Silicon Labs Si7021 temperature and humidity sensor
-
Sensors
€18.03excl. VAT€22.00incl. VAT
Small board based on the InvenSense MPU9250 sensor, containing a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer
-
Sensors
€17.21excl. VAT€21.00incl. VAT
Breakout board based on the WCS1700 current sensor and the LM393 chip. It measures alternating current (max
-
Sensors
€7.38excl. VAT€9.00incl. VAT
Module that reads the current and raises an alarm when a current threshold is exceeded
-
Sensors
€4.51excl. VAT€5.50incl. VAT
Built around the ZMPT101B single-phase voltage transformer, this module measures an AC voltage (max
-
Sensors
€15.98excl. VAT€19.50incl. VAT
Built around the Sensirion SGP30 air quality sensor, this very small breakout board reports the carbon dioxide concentration (telling you how stale the air in a closed room is) and the TVOC (Total Volatile Organic Compounds), that is the concentration in parts per billion of airborne particles
-
Sensors
€36.89excl. VAT€45.00incl. VAT
Small module built around the Amphenol SGX Sensortech MICS-6814 air quality sensor
-
Sensors
€7.79excl. VAT€9.50incl. VAT
Compact module built around the DHT22 temperature and relative humidity sensor. Its single-wire serial interface makes it easy to use
-
Sensors
€45.90excl. VAT€56.00incl. VAT
Breakout board based on the Panasonic AMG8833 sensor
-
Sensors
€13.52excl. VAT€16.50incl. VAT
Compact module combining a Doppler microwave motion sensor, a signal amplifier stage (not present on the bare sensor), two status LEDs and a trimmer for setting the detection range from 2 to 16 metres. It has a transmitting section and a receiving section
-
Sensors
€6.56excl. VAT€8.00incl. VAT
Breakout board built around the LMT84DCKT analogue temperature sensor (SOT-23-5 package) and the Microchip MCP6L01T-E/LT op-amp, which amplifies the voltage the sensor delivers at its output