ATTO: The World’s Smallest Arduino
The ATTO Board is very little and has several resources in a single board. Hereafter, in Figure 2, you can see a comparation with other Arduino boards.
Similar Posts
This 3D-printed infinity cube is easy to make, hard to resist
Infinity cubes and icosahedrons are things that have always caught my eye. They however always seemed quite hard to make, because of the relative complex frame. This infinity cube, however, has a frame that is printed in one piece. Making the build a lot stronger and easier than most other projects. The…
DIY $60 Google Glass-Like Headset
Instructables author Daniel Quintana loves mountain biking, but after having to interrupt a ride to continuously check the time, he did what any normal maker would do in this situation: he created his own Google Glass-like headset from scratch. His creation, called Uware, takes the form of a 3D-printed enclosure with a tiny 0.49″ OLED screen…
Wireless Laser-Gate Timing System for Track and Field
The system consists of two finish line modules and one start line module. In the finish line, you will have an Arduino UNO, nRF24L01+ Transceiver, LED button pad, photoresistors, LEDs, plastic enclosure, and tripod together with my Finish Line PCB. This module acts as the master, from the LED button pad you will decide when…
Smart Room Lighting with ESP32
Use some LED panels and strips along with an ESP32 and local webserver to control the lighting of a room from anywhere in the house. I recently purchased several new lights for an auxiliary workspace in my room, but there was a problem: it took far too long to turn the lights on and…
ROBOTIC Arm in plexiglass part 1
We create our first robotic arm with four degrees of freedom, with bench-top, gripper for grasping objects and five servo controls that can be managed by Arduino or other electronics. Automation and robotics represent the most promising sectors in Italy in the industrial field and companies that create solutions such as automatic assembly machines…
Poseidon: Open Source Syringe Pump and Microscope System
Developed by students at the California Institute of Technology, Poseidon is an open source alternative to commercial syringe pump and microscope system. The Poseidon microscope consists of a Raspberry Pi, touch screen module, and commercially available digital microscope housed in a 3D printed stage. This device offers a large and clear view of the object…
