PIANO is a application base related to music or sound performing. Comes with two touch sensors(TS20) which communicate with M5 core via I2C protocol (address is 0x6A and 0x7A).
Documents and useful links
M5PIANO.ino
Let’s make a Dashboard for the gateway Antennino network, using open-source software that allows us to implement a control panel for our wireless devices. We left, at the end of the first episode after describing the hardware of the new Gateway for Antenninos, based on the powerful NodeMCU ESP 32, and introducing the…
Finally, the Raspberry Pi 4 has arrived, with a complete and ready to use kit! The starter pack with everything you need to be able to use the new Raspberry Pi 4.If you don’t know what can be used to start working with this minicomputer, this is the solution for you. The set contains a Raspberry…
2-channel RF trasmitters with 433 MHz operating frequency. Ideal for applications in the field of alarms and coded commands where high efficiency and low spurious emission are required. In compliance with the European Standards EN 300 200 and ETS 300 683 (Electromagnetic Compatibility). Encoder: 86409 – 7 mA @ 12V, 1mW E.R.P. Dimensions (mm): 67x15x40. …
This is an Arduino/Fishino RGB Color Sensor breakout uses TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 color sensor can detect and measure a nearly limitless range of visible colors. The TCS3200 has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each…
Switching power supply with 5 VDC – 3 A output and cable with Type C connector. Designed for a wide range of devices such as Raspberry Pi 4, mobile phones, media players, portable gaming devices, GPS, etc. Features Main power: 100-240 VAC, 50/60 Hz, 0,7 A max. Power: 15 watt max. Output voltage: 5 VDC…
It is no longer a problem, nor it is expensive, to print big size items and terrain models: we showed you that by means of our new creation, the FDM 3D printer that our well-equipped readers will be able to create, thanks to the assembly kit. The machine is capable of manufacturing solid prints…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
