Manual Mini Shredder in Stainless Steel – Kit for Recycling Plastic and Wood

Manual mini shredder supplied as a kit, with frame and blades made of AISI 304 stainless steel. It is particularly well suited to recycling PLA and ABS objects and Laywood left over from 3D printing. It will also shred objects in PE, PP, expanded and semi-expanded PVC and everyday plastic items in general, PET bottles, parts in spruce, beech, poplar and other softwoods, hardboard, Masonite (3mm thick), rough chipboard, plywood and so on. The 15 stainless steel blades, with 3 teeth each, are fitted on two parallel shafts coupled by 2 pinions, one of which allows the shredder to be turned by hand with a 30 mm socket wrench (not included). The load-bearing frame, made of 4 mm stainless steel sheet, gives the machine stability and strength, while the 17mm hexagonal shafts in C45 steel provide excellent resistance to twisting.
For safety reasons the mini shredder can only be turned by hand.

The hopper and the drawer that collects the shredded material (shown in green in the video) can be 3D printed by downloading the STL files from this LINK
If you do not have a 3D printer of your own, a printing service is available.

• C45 steel shafts running on 4 bearings, 15x35x11mm
• 15 AISI 304 stainless steel blades with 3 teeth, 4 mm thick
• Frame and main parts made from AISI 304 stainless steel sheet, 3 and 4 mm thick.
• Steel pinions, 18 teeth, module M2.5
• Maximum torque that can be applied: 160Nm (tested at 200Nm)
• Pinion with a hexagon for a 30mm socket drive wrench
• Base with mounting holes