Small board able of hosting the ESP8266 Wi-Fi module (not included). It has a 2-way terminal for power input; 4-way terminal with + 5V, ground and the lines IO0 and IO2 (two GPIOs of the U2 module) carrying the data; connector (CN1) with the same signals as the ESP8266 module (TX and RX of the…

Electronic board with 20 miniature Neopixel LEDs (2.4×2.7×1.1 mm) and connectors with power supply pins and communication bus. Suitable for use with Nixiel displays (not included, see related products). Power supply: 5 VDC, dimensions (mm): 57x30x3.5, weight: 5 grams. Attention! the LASER cut plexiglass parts, necessary to complete the Nixiel display, are not included.  …

This kit allows you to create a single display with 7 segments that recall of the fascinating Nixie tubes. It is composed of 10 LASER engraved plexiglass panels with the numbers from 0 to 9, three plexiglass frames (upper, middle and lower) and an electronic board with 20 miniature Neopixel LEDs (2.4×2.7×1.1 mm). Each panel…

Sealed rechargeable battery with a rated voltage of 6 V, 1.3 Ah of capacity and low level of self-discharge. Dimensions: 97 x 24 x 52 mm; Weight: 300 g. Suitable for alarm systems, UPS, toys, etc.   Technical spetifications Rated voltage: 6 V Capacity: 1.3 Ah Weight: 300 g Dimensions: 97 x 24 x 52 mm   Go to…

Sealed rechargeable battery with a rated voltage of 6 V, 3.4 Ah of capacity and low level of self-discharge. Dimensions: 134 x 34 x 62 mm; Weight: 630 g. Suitable for alarm systems, UPS, toys, etc.   Technical spetifications Rated voltage: 6 V Capacity: 3.4 Ah Weight: 630 g Dimensions: 134 x 34 x 62 mm   Go…

Keep social distancing with an audible and optical signal that warns us when we are getting too close to the counter of a shop, a kiosk or a desk. The kit consists of a screen-printed plexiglass panel, a perforated container and all the electronic components to be wired. The device is based on a tiny…

Small module for Raspberry Pi equipped with 5 megapixel camera (Omnivision 5647). It is capable of taking pictures with a resolution of 2592×1944 pixels. The small module, which has dimensions of only 25x24x9 mm and weighs 3 grams, can also shoot HD video in 1080p format at 30 fps, giving the possibility to users of…

A complete starter kit with all you need to use the Raspberry Pi 4. If you don’t know what it is necessary to start working with this minicomputer, this is the solution for you. The set contains a Raspberry Pi 4 with 8 GB memory, a beautiful dual color container, 32 GB HC memory in…

The MAX30100 is an integrated pulse oximetry and heart rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals. The MAX30100 breakout operates from 1.8V and 5.5V power supplies and can be powered down through software with negligible standby current, permitting…

ABS Handheld Electronics Enclosure with rounded corners and plastic panel. Shiny surfaces. External dimensions: 125 x 70 x 39h mm. Internal dimensions: 120 x 63 mm. Go to Open-Electronics Store

The MAX30102 is integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. It provides a complete system solution to ease the design-in process for mobile and wearable devices. This module can operates on a single 1.8V power supply and a separate 5.0V…

12 Vdc to 220 Vac inverter with pure sine wave output and maximum power of 600 watts. The inverter is equipped with overload protection, input overvoltage, short circuit and low battery alarm. It has USB output (5 V – 500 mA), Schuko socket and can be used to power: TV, VCR, PC, HI-FI systems, refrigerators,…