Inspired by Yoshii Kazuya’s laser-spiked outfit, github user abetusk decided to create an excellent version of the getup by embedding 128 laser diodes in his own jacket. These lasers are powered by an Arduino Nano, along with a pair of I2C PWM output boards, allowing them to be switched in sets of four. The lasers…
Just few weeks ago, the maker Electronoobs announced the Homemade Soldering Iron v1.0, but unfortunately it encountered many problems from the beginning: the design was held back by the quality of the $5 replacement soldering iron tips he designed it around. Now Electronoobs is back with the second version of the Soldering Iron and this time it’s…
Arduino has launched the Arduino Yun Rev 2, a rev of the original OpenWrt-driven Arduino board with enhanced LAN, USB, security, and power supply features. The Arduino Yun 2 is equipped with the same MIPS-based, 400MHz Atheros AR9331 WiFi SoC, 64MB of DDR2 RAM, and 16MB of flash found on the Rev 1. The AR3991…
Dear maker Anthony DiPilato, that is forward thinking! “It’s just used for pulling the plane out of the hangar and putting back in. It’s stored in the hangar. There are some tugs small enough to put in a plane but this one weighs about 200lbs so it’s not really portable. Once the plane is out…
Probably time manipulation is an attractive target for everyone. This project certainly makes it appear that way. YouTuber MadGyver’s glove uses a gigantic LED controlled by an Arduino Nano to allow objects such as a fan, water falling from a shower, and a spinning top to stop, slow down, and even reverse. The trick is that when the LED’s…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
