JST cable 3 Wire 1,25mm
15cm long cable with 3-pin JST connector, 1.25 mm pitch.
….
Read more: JST cable 3 Wire 1,25mm
15cm long cable with 3-pin JST connector, 1.25 mm pitch.
15cm long cable with 3-pin JST connector, 1.25 mm pitch.
Similar Posts
Intelligent Battery charger 12V – 1500 mA
Fully automatic switching battery charger with IP65 protection rating. Allows charging of 12 volt acid lead type EFB, AGM, GEL, etc. Controlled by a microcontroller, it performs the diagnosis and the battery charge in total autonomy. Comes complete with cables with insulated pliers. …
Save your Skin with this Open Source UV Index Detector
It measures solar radiation and visualizes the corresponding value on the integrated display of a miniaturized Arduino, in order to tell us when to expose ourselves to the sun… Summer is just around the corner and whether you choose the seaside or the mountains for your holidays, there is no doubt that most of…
24V DC MOTOR – 12,000 RPM
Powerful motor with 24V dc power supply and a rated speed of 12,000 RPM. Consumption: 2.5 A, engine dimensions (mm): Ø 43×83, spindle: Ø 5×13, weight: about 348 grams. Go to Open-Electronics Store Build it yourself Boards, sensors and kits for projects like this one. Browse the shop
An Electric Speed Control for DC motors
It allows to change the revolutions per minute in any brushed motor that is powered by 12 to 35 Vcc, thanks to a handful of electric components and to the popular 555 timer. In different applications, such as for example electric drills and screwdrivers (and fans as well), it becomes necessary to adjust –…
Amplifier module
Voltage amplifier module that allows raising the level of any continuous or variable signal, provided that it is unidirectional. This amplifier can operate in both inverting and non-inverting modes. Supply voltage between 1.8 and 6 V, with a stand-by absorption of just 85 μA. All input and output contacts are available…
Liquid level indicator for tanks – in DIY kit
This monitoring device is useful for keeping track of the liquid level (such as water) inside tanks, reservoirs, and containers. It features seven inputs (to connect electrodes) that can be positioned inside the tank. Each electrode is associated with a corresponding LED that lights up when the liquid reaches the desired level (i.e., the electrode)….
