Micro USB Connector for PCB SMT
5-pin female type USB micro-USB connector.
SMT assembly.
….
Read more: Micro USB Connector for PCB SMT
5-pin female type USB micro-USB connector.
5-pin female type USB micro-USB connector.
Similar Posts
Gearmotor 6V dc – 200 rpm – metal shaft
Gearmotor with metal shaft, reduction ratio 120: 1, speed 200 rpm (at 6 VDC), consumption 200 mA. Dimensions (mm): 56x50x23, weight 33 grams. Particularly suitable to make robots. The recommended supply voltage for this motor is 3 to 6 V. …
12V Light Control Switch
Simple circuit able to automatically activate a load (lamps, etc.) when the the brightness in the room drops below a threshold that can be set as desired (adjustable via trimmer). The switch will return to the initial condition as soon as the brightness level reaches the preset level. It has relays with contact output (common,…
Using Aurel RFTide along with Arduino: the RFTide Shield
Putting in contact the wireless world of the mesh networks with the world of Arduino allows the developers to create new and interesting applications, particularly in the field of domotics. To reach the objective, we created a dedicated shield (called RFTide shield), purposely made to manage the basic RFTide modules with Arduino in an easy…
ARDUINO YUN REV.2 AND SR-201 RELAY CARD
We present an automation solution that provides the ability to control a series of relays, using the local wired Ethernet network. All driven by the new version of the Arduino Yún board. The project that we present is born from the almost simultaneous availability of two devices that, although of different origins, lend…
TiDiGino, the Arduino-based GSM remote control
Using an ATmega 2560 and therefore the heart of Arduino, we have developed a universal remote control with GSM. This allows to control 2IN/2OUT, DTMF key, gate control and GSM thermostat activated remotely. We have already presented several remote control with different functions. But now we want to present the best remote control ever…
Driver for 2 DC motors 10 A – 4 control modes
Motor driver able to manage 2 DC motors with a supply voltage between 7 Vdc and 35 Vdc and a max of 10 A for each channel. It can be controlled in RC mode (modeling receiver), Analog, PWM from a microcontroller (Arduino or other) and…
