This set includes sensor boards and reflective wheels to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors are not included with this kit). 3-tooth and 5-tooth encoder wheels are included to provide options of 12 counts per revolution and 20 counts per revolution of the motor shaft (to compute the encoder counts per revolution of the gearbox output, multiply by the gear ratio).
Note: This sensor
Chassis specially designed to make a crawler robot able to move on rough terrain and able to transport a load of about 7 kg. The frame, the gears, the suspension struts, and the wheels are made of aluminum. The upper part of the frame has many fixing holes and some slots for the installation of…
2×15 pin male connector 2.54 mm pitch, particularly suitable for use with M5STACK series cards and more. Material: phosphor bronze, Dimensions (mm): 38x7x6, SMT assembly. Go to Open-Electronics Store Build it yourself Boards, sensors and kits for projects like this one. Browse the shop
This project presents a universal infrared remote control that can also be managed via Internet, based on RandA (supplied with a dedicated shield) and on Raspberry Pi2. Despite the fact that still only a few people take advantage of the “smart” revolution in home automation (intended as a complete and integrated automation and computerization…
Simple circuit able to automatically activate a load (lamps, etc.) when the the brightness in the room drops below a threshold that can be set as desired (adjustable via trimmer). The switch will return to the initial condition as soon as the brightness level reaches the preset level. It has relays with contact output (common,…
Aluminum heat sink with 12 volt fan and 0.1 A consumption. It can be used to dissipate the heat of LEDs or other devices. Cable length: about 9 cm, dimensions (mm): 55x55x12. Go to Open-Electronics Store Build it yourself Boards, sensors and kits for projects like this one. Browse the shop
By coupling a standard NMEA GPS receiver and an Arduino board we created a super simple and effective Arduino GPS logger. This device allows you to trace the route taken by a person or vehicle (or any other moving object) by simply doing a periodic caching of location points coming from the GPS unit. As…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
