SET OF 100 RED LEDs
100 pcs Ultra Bright 5mm Round LED Diode, color red. Current 5-20 mA.
100 pcs Ultra Bright 5mm Round LED Diode, color red. Current 5-20 mA.
100 pcs Ultra Bright 5mm Round LED Diode, color red. Current 5-20 mA.
Similar Posts
ESP32 Low Power Module
ESP32 Low Power Module, based on Espressif’s SoC capable of providing full compatibility with the standard MINI ESP32 version. Compared to the latter, this module lacks a USB interface, dedicated exclusively to programming the ESP32, making it ideal for low-power applications. Compatible with the Arduino IDE, it includes a WiFi 802.11 b/g/n transceiver and a…
Breakout Board with RFM69 (434 MHz)
Breakout board based on the 434 MHz RFM69HCW transceiver module. It uses the SPI (Serial Peripheral Interface) interface to communicate with Arduino or another host microcontroller, operates in the ISM radio band (Industry, Science and Medicine) which does not require a license. It is able of transmitting up to 100 mW at 300 kbps, covering…
12 channels PDA transmitter
Multi-channel RF transmitter equipped with HCS301 dynamic code encoder. Suitable for applications where a high degree of safety and a high number of channels is required (12). Can be used with: AM OOK 433.92 receivers (excluding BC-NBK). Power supply: 6V battery, Consumption: 10 mA, Frequency: 433.92 MHz, Channels: 12, Encoder: HCS301, Dimensions: 84.5x54x10.4 mm (Aurel…
Let’s play with the ESP-03 Demoboard
Let’s experiment and prototype applications via the wireless board based on the ESP8266 module. Let’s get back to the discussion of the ESP8266 chip, in which we described the new Fishino board, whose major elements are the ATmega328 microcontroller and the ESP03 module, the latter being based right upon an ESP8266 chip. In…
Compact switching power supply 12 Vdc / 1,2 A plug DC output
Switching power supply ultra compact (46.5 x 45.9 x 27.2 mm) with output 12 V – 1.2 A DC plug (center positive). Protected from short-circuit and with a low energy consumption with no load.. …. Read more: Compact switching power supply 12 Vdc / 1,2 A plug DC output Build it yourself Boards, sensors…
OpenStore: PCB Etching System with Agitator and Heater
This PCB Etching Kit System is easy to use and easy to assembly. The printed circuit board etching tank features graduated markings to assist in setting appropriate etchant depth. Normal usage requires a minimum of 2 liters of etching solution. The system includes some handy wire clips used to hang your PCB(s) in…
