COFFER3 Plastic Enclosure 160x95x49
€11.48excl. VAT€14.00incl. VATABS enclosure with rounded corners and plastic panel
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Enclosures -
GSM/GPRSABS DIN Rail Enclosure for FT1771M
€20.49excl. VAT€25.00incl. VATThis DIN rail enclosure is the ideal accessory for installing your FT1771M control board professionally inside an electrical panel. Supplied ready cut and drilled, it makes for an easy, clean fit, ready to use.
-
EnclosuresPlastic enclosure with side panels and ventilation grille – 92x217x235 mm
€11.07excl. VAT€13.50incl. VATPolystyrene enclosure with side panels and ventilation grille, black.
-
EnclosuresPlastic DIN Rail Enclosure – 62.8×88.8×138.8 mm
€5.66excl. VAT€6.90incl. VATLight grey polystyrene (C8H8)n enclosure for DIN rail mounting.
-
EnclosuresPlastic DIN Rail Enclosure – 64.7×69.7×89.3 mm
€4.10excl. VAT€5.00incl. VATLight grey polystyrene (C8H8)n enclosure for DIN rail mounting.
-
EnclosuresSealed Plastic Enclosure – 79.8×174.8.4×225 mm
€12.70excl. VAT€15.50incl. VATLight grey polystyrene enclosure
-
EnclosuresPlastic enclosure with mounting flanges – 27.9×58.8×75.9 mm
€3.69excl. VAT€4.50incl. VATPolystyrene enclosure with side mounting flanges, black.
-
Raspberry PiEnclosure for Raspberry Pi B+
€12.30excl. VAT€15.00incl. VATSemi-transparent plastic enclosure made to house the Raspberry PI model B+ and the Raspberry Pi 2 type B
-
ArduinoClear Enclosure for Arduino UNO Q
€7.30excl. VAT€8.90incl. VATEnclosure designed to protect and hold the Arduino Uno Q board, with easy access to every connector.
-
EnclosuresPlexiglass Enclosure for 3.5″ TFT Display
€15.57excl. VAT€19.00incl. VATBlack plexiglass enclosure for a 3.5″ TFT display. The matching display has a touch screen and an ESP32 module
-
ArduinoEnclosure for Arduino YUN / TURQUOISE
€8.11excl. VAT€9.90incl. VATTwo-piece injection moulded ABS enclosure that clips onto the Arduino YUN/TURQUOISE board
-
micro:bitClear Case for micro:bit
€4.02excl. VAT€4.90incl. VATClear protective case made of 2 mm plexiglass, sized to house a micro:bit
-
Ethernet devicesEnclosure for ETH-RLY02
€17.21excl. VAT€21.00incl. VATPlastic enclosure made specifically to house the ETH-RLY02 Ethernet board
-
Ethernet devicesEnclosure for ETH008
€20.49excl. VAT€25.00incl. VATPlastic enclosure made specifically to house the ETH008 Ethernet board
-
Ethernet devicesEnclosure for DS1242
€22.05excl. VAT€26.90incl. VATPlastic enclosure made specifically to house the DS1242 ethernet board
-
EnclosuresPlastic Enclosure for K2649
€22.95excl. VAT€28.00incl. VATThe enclosure designed for the K2649 kit, to be ordered separately when you want to box up the finished build.
-
EnclosuresABS plastic enclosure 115x90x55 with mounting flanges
€9.02excl. VAT€11.00incl. VATIdeal for instruments, telecommunications equipment, portable devices and laboratory use
-
EnclosuresABS Plastic Enclosure 115X65X40 with Flanges
€7.79excl. VAT€9.50incl. VATIdeal for instrumentation, telecommunications equipment, portable devices and laboratory use
-
EnclosuresABS Plastic Enclosure IP65/NEMA4 115x65x40
€7.79excl. VAT€9.50incl. VATIdeal for instrumentation and telecommunications equipment, for both portable and bench devices
-
EnclosuresBlack ABS Plastic Enclosure 135 x 75 x 50 mm
€4.02excl. VAT€4.90incl. VATEnclosure made of impact-resistant ABS.