In this project, I will guide you on how to build a basic mobile phone using the STM32F407 Discovery Kit and GSM A6 module. This project contains 3 main modules : GSM A6 Module – This is module is responsible for Making/Receiving Calls and SMS. LCD 16×02 Display – To see the output Hex Keypad…
Developing firmware for AT-based GSM/GPS modules is a big bottleneck for software development due to the many problems intrinsic to AT-based programming style and the many challenges in dealing with manufacturer specific AT command set. ATCommander is a full-featured desktop app for easily controlling GSM/GPS modules with AT commands. It gives you the…
GSM0308-11 is an Enfora Enabler IIIG Quad-Band GSM/GPRS module with B2B RF connector and SIM holder. The Enfora Enabler IIIG is a fully certified quad-band OEM module family that packs complete GSM/GPRS functionality into a compact footprint. The embedded software environment enables development of mobile connectivity and device intelligence by utilizing built-in program rules engine,…
[youtube id=”b18k8dLhr1w” width=”620″ height=”360″] We’re a Finnish start-up company which specializes in active green walls which can purify air 100x better than traditional green walls. Few years ago we were in a need for easy way to get our green walls use GSM network to communicate with our servers. In the very first prototype we…
[iframe_loader src=”http://www.youtube.com/embed/jtB6e36J7w4?hl=it&fs=1″ height=”349″ width=”425″ ] We create a lamp controlled by SMS using a GSM shield, a RGB shield and a Arduino UNO. Due to the simplicity of these boards, simply plug one over the other and connect a strip led to have a lighting effect. Then sending normal text messages from any…
Shield for Arduino designed and based on the module GSM/GPRS SIM900 or the GSM/GPRS & GPS module SIM908, to make calls, voice and data connections via GPRS. HARDWARE INNOVATIONS This new version (old Arduino GSM shield) has several new hardware features, that allow maximum customization and provide many configurations. We begin with the…
Allows you to create data connections on the GSM network through a standard USB interface. The cellular modems, particularly USB-stick ones, are now at very affordable prices, however they’re limited: they are explicitly designed for Internet connections, so you cannot use it as a normal modem and so implement, for example, a point to point…
Some post ago we presented a PCB to mount the SIM900 module. The project is used in our GSM remote control and the Arduino GSM Shield. The dimensions aren’t big (1.75×1.95 inches) but in some cases they are too important for a projects, so…. ..we have developed a small PCB GSM module to build device like localizators (coming…
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900. It’s the cheaper module now avalaible in the market. The module is not simple to mount by an hobbyst, so we use the Breakboard TDGGSM_900 that we presented in this post. You…
This GSM Mobile is used for our Remote Control (for example Gate Control, Temperature Control….). We use the word ‘module’ because, unlike what we did in our remote control projects, this time around the mobile phone is not mounted on a printed board, but rather on a small auxiliary board which is then inserted in a…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
