IR LED module equipped with four infrared diode emitters activated by a MOSFET used as a static switch. To obtain the best possible coverage, the IR LEDs are arranged in an arc, allowing infrared radiation to be at least 90 °. Up to 4 modules can be connected together to cover 360. …. Read more:…

<!–cke_bookmark_155S–><!–cke_bookmark_155E–>  The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless…

Based on the DHT11 sensor, this module allows measuring temperatures between 0 ° C and + 50 ° C and relative humidity from 20% to 90%. It has a single-wire serial interface that facilitates its use. The DHT11 sensor is calibrated extremely precisely, the calibration coefficients are stored in the OTP…

Fishino UNO is an Arduino compatible development board with WiFi, microSD cards reader and RTC on board. It’s 100% compatible with Arduino UNO. Thanks to a complete set of libraries, you’ll be able to manage all your projects from web with simplicity!   Technical features​ …

  Switching power supply ultra compact (46.5 x 45.9 x 27.2 mm) with output 12 V – 1.2 A DC plug (center positive). Protected from short-circuit and with a low energy consumption with no load.. …. Read more: Compact switching power supply 12 Vdc / 1,2 A plug DC output

The SB330 is connected to a Mercury System Base Board by means of I2C bus. The address of the board could be dynamically set by means of a 4 positions dip switch, allowing up to 15 address values (address 0x00 is reserved for I2C general call broadcast addressing scheme). The temperature…

Electronic board based on the HX711 chip, a 24-bit analog-to-digital converter, specifically designed to interface the load cell to a microcontroller such as Arduino, Fishino or compatible. The input multiplexer selects either Channel A or B differential input to the low-noise programmable gain amplifier (PGA). Dimensions (mm): 33.6×20.5×3. Warning! Arduino, Fishino…

Load cell type “S” stainless steel made, accuracy class C3, maximum capacity 100 kg and two M12 threaded holes. It consists of small elements called strain gauges mounted in precise points on the structure. It supplies an electrical signal at the output which varies according to the deformation that the force…

Development platform based on Espressif’s ESP32 chip, a 32-bit Dual-Core Tensilica LX6 microcontroller with a 240 MHz clock frequency, 520 kB internal SRAM memory, Wi-Fi 802.11 b / g / n , Dual-mode Bluetooth (classic and BLE) and 28 I / O pins. On the board there is also a 32…

12V Kapton pad with a 3M adhesive sheet to use with your 3D printer. Size (cm): 40×40 Maximum power at 12 Vdc: 240 watts Maximum current: 20 A, 12 Vdc Maximum temperature: 90 ° C Length of the power supply wires: 40 cm …

  New FDM (Fused deposition modeling) 3D printer capable to produce 40x40x40 cm (64,000 cm3) objects. Ideal for hobbyists and professionals who want to get models and reproductions in PLA, ABS, Nylon, wood and other material that can be melted below 300 ° C. The 3D4040 is…

This breakout is ideal for self-powered garden lamps that turn on automatically at darkness. During the day, thanks to a small photovoltaic panel (not included), it allows you to charge a battery that in poor light conditions, allows you to power a group of LEDs with white light. The circuit is very simple and extremely small,…