A complete starter kit with all you need to use the Raspberry Pi 4. If you don’t know what it is necessary to start working with this minicomputer, this is the solution for you. The set contains a Raspberry Pi 4 with 8 GB memory, a beautiful dual color container, 32 GB HC memory in…

The MAX30100 is an integrated pulse oximetry and heart rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals. The MAX30100 breakout operates from 1.8V and 5.5V power supplies and can be powered down through software with negligible standby current, permitting…

ABS Handheld Electronics Enclosure with rounded corners and plastic panel. Shiny surfaces. External dimensions: 125 x 70 x 39h mm. Internal dimensions: 120 x 63 mm. Go to Open-Electronics Store

The MAX30102 is integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. It provides a complete system solution to ease the design-in process for mobile and wearable devices. This module can operates on a single 1.8V power supply and a separate 5.0V…

12 Vdc to 220 Vac inverter with pure sine wave output and maximum power of 600 watts. The inverter is equipped with overload protection, input overvoltage, short circuit and low battery alarm. It has USB output (5 V – 500 mA), Schuko socket and can be used to power: TV, VCR, PC, HI-FI systems, refrigerators,…

Spray based on colloidal graphite able to make any surface conductive. It forms a thin silvery gray veil that adheres perfectly to plastic, metal, wood, glass, ceramic … etc. Used to internally cover the housings of sensitive measuring instruments and delicate electronic equipment, it totally eliminates the problem of electrostatic charges, which could otherwise compromise…

Digital pen multimeter that allows misuring AC and DC voltages up to 600 V, AC and DC currents up to 200 mA, capacitance and resistance values ​​up to 40 Mohm. It has backlight, LED flashlight, data-hold function, low battery indication, non-contact detection NCV (Non-contact Detection), automatic / manual range selection, automatic shutdown, diode test and…

RTLDUINO is a board consisting of the RTL8720DN (BW16) module. There are 13 GPIOs, an RGB LED for general use, two buttons for programming and reset (Burn and RST), micro USB connector for programming / power. The RTL8720DN module features dual band Wi-Fi (2.4GHz and 5.8GHz) and Bluetooth Low Energy 5.0. It consists of a…

Mini digital multimeter with LCD display. It is capable of measuring direct and alternating voltages up to 310 V, resistances up to 40 Mohm, frequencies up to 100 kHz, electrical continuity. It has automatic range change, LED flashlight, non-contact detection NCV (Non-contact Detection), ambient temperature indication, automatic shutdown and low battery indication. Power supply with…

PIPPY is an open source bionic robot with the appearance of a dog controlled via Raspberry Pi. Pippy. It is equipped with a number of sensors that allow it to perform actions such as monitoring the environment, following lines, avoiding obstacles, self-balancing, motion detection or color detection. Pippy also has a built-in 9-DoF motion sensor….

Omnidirectional electret condenser microphone with 2 terminals for PCB mounting. Dimensions (mm): diameter 9.8×7. Techical specifications General Impedence: LOW Standard voltage: 4.5V Range of operating voltage: 1,5V TO 10V Current drain: 0,5mA Max. sensitivity: 64db ± 0,3db S/N ratio: 60db or more Frequency:  50HZ – 13KHZ   Go to Open-Electronics Store

Ultra compact (68 x 35 x 14 mm) switching power supply with USB output, short circuit protected and characterized by low power consumption under no load. Designed for a wide range of devices such as cell phones, media players, GPS, etc … Techical specifications Power supply: 100-240 Vac, 50/60 Hz Power: 7.5W Output voltage: 5…