UV disinfection robot
Here we are creating the Robot called UV disinfection robot . This remotely controlled robot also contains extra safety features like collision avoidance and human exposure. This robot is 1.5 meter long.
Similar Posts
Let’s Build an open source Quadcopter – Part1
A high performance multirotor copter that may be created by starting from a premade base and an Arduino Mega based board, that may receive the commands from a model aircraft’s remote control, and that supports telemetry via smartphones. Nowadays most people call “drone” something that is, actually, a multicopter whose most common form…
Let’s create a small level with a matrix display
The low cost of sensors and components allows us to build small gadgets and tools that were unthinkable just a few years ago. In this project, a “bubble” level has been created, which is a tool used to determine if a surface is perfectly level. The level was constructed using an accelerometer and an…
An ARDUINO based JPEG Camera with IR and PIR
Let’s equip Arduino with a serial-interface JPEG Camera with IR and try two applications: the first one saves shots (on a SD-card) at regular intervals while the second uses a PIR sensor to detect intrusions and photograph what happens. Recently, miniaturized cameras with serial communication interface have been launched on the market. Compared…
Make a Game Console Using Your Raspberry Pi!
Do you want to play retro games without paying for the expensive old consoles? You can do just that with the Raspberry Pi. The Raspberry Pi is a “credit card-sized computer” that is capable of many cool things. There are many different types of these. The Pi is readily available in most online retailers like…
How to detect flam with flame sensor and Arduino
A typical flame sensor is a device used to detect fire in a furnace but slowly made compatible with Arduino boards by integrating it into modules. In today’s post, we’ll be discussing more on flame sensors and what you need to know when using a flame sensor module for your Arduino! Today’s guide…
Control a 12V Lamp via SMS with Arduino
This project uses the SIM900 GSM shield to receive and send SMS with the Arduino. This projects aims to: turn a 12V lamp on when you send an SMS to the Arduino with the text “ON” turn a 12V lamp off when you send an SMS to the Arduino with the text “OFF” you can…
