2×15 Pin Headers Socket 2.54mm Female Connector
2×15 pin female connector 2.54 mm pitch particularly suitable for use with M5STACK series boards and more. Material: phosphor bronze, Dimensions (mm): 38x7x3, SMT assembly.
Similar Posts
Display OLED I2C 0,91" 128×32 pixel
Module with 0.91″ OLED display (Organic Light Emitting Diode), 128×32 pixels, blue color, I²C interface, graphic controller SSD1306, viewing angle> 160°, interfaceable to Arduino. Equipped with good contrast, it does not need backlighting. Power supply: 3,3 to 5 VDC, dimensions (mm): 38,3x12x4, weight: 3 grams, working temperature: from -40°C to +70°C. …. Read more: Display…
OpenStore: Venus GPS 65 ch with SMA Connector
This is the latest version of the Venus GPS board; the smallest, most powerful, and most versatile GPS receiver. It’s based on the new Venus638FLPx. The Venus638FLPx outputs standard NMEA-0183 or SkyTraq Binary sentences at a default rate of 9600bps (adjustable to 115200bps), with update rates up to 20Hz! The Venus638FLPx also allows for limited on-chip…
Raspberry Pi 3 Model B+
<!–cke_bookmark_155S–><!–cke_bookmark_155E–> The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless…
Control all your IR appliances through Bluetooth (or internet)
A Bluetooth enabled remote that will help you control one or more IR-controlled electric payloads. In this post, we are going to present a project for emulating an IR remote control composed of a RandA board (an Arduino that has connectors to interface with Raspberry Pi on one side and connectors for…
NTC thermistor 100K SMD 10% 2-PIN 1206
NTC thermistor 100K SMD 10% 2-PIN 1206 Go to Open-Electronics Store Build it yourself Boards, sensors and kits for projects like this one. Browse the shop
Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or…
