NTC thermistor 100K SMD 10% 2-PIN 1206
NTC thermistor 100K SMD 10% 2-PIN 1206
NTC thermistor 100K SMD 10% 2-PIN 1206
NTC thermistor 100K SMD 10% 2-PIN 1206
Similar Posts
ESP8266 Wifi Bee module
Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module or Upgrade firmware….
Switching power supply with USB output – 5V / 1A
Ultra compact (68 x 35 x 14 mm) switching power supply with USB output, short circuit protected and characterized by low power consumption under no load. Designed for a wide range of devices such as cell phones, media players, GPS, etc … Techical specifications Power supply: 100-240 Vac, 50/60 Hz Power: 7.5W Output voltage: 5…
RS485 module – mounted
This breakout board allows interfacing between a TTL serial line (for example the output of a discrete UART or integrated in a microcontroller) and a RS485 bus, serial too, but with a balanced line wich has two wires referred to ground, instead of unbalanced (a conductor referred to ground) as in the classic TTL serial….
IONO Pi: A Raspberry Pi based PLC
A device that makes Raspberry Pi suitable for industrial environments, an alternative to PLCs for automation control applications. In the 206th issue of Elettronica In, we featured the first device in the Strato Pi line created by Sfera Labs: the Strato Pi Server. This product, designed for industrial environments and based on Raspberry…
Arduino MKR VIDOR 4000
Arduino MKR VIDOR 4000 is a compact FPGA (Field Programmable Gate Array) development board based on Intel® Cyclone® 10CL016, offering 16K logic elements, 504Kbit of embedded RAM, and 56 18-bit x 18-bit hardware multipliers for highspeed DSP applications. The FPGA pins can toggle up to 150MHz and can also be configured as common communications ports such…
Demoboard for ESP32
Demoboard for the famous ESP32 Bluetooth and WiFi module (available among related products under code YB555). The ESP32 module provided for this demo board has a MicroUSB connector that can be used for programming. The ESP32 demo board must be powered at 12V via the PWR plug in order to supply power to all the…
