For temperature compensation, temperature measurement and control.
Features
material: epoxy-coated
Specifications
nom. resistance: 1 kohm
B-constant (±7%): 3700°K
max. permissible current: 80mA
thermal dissipation constant: 6mW/°C
thermal time constant: 17sec.
dimensions: Ø5mm
Breaking News!!! The new bigger 3D printer 3D4040 is in pre-order with 15% off. New FDM (Fused deposition modeling) 3D printer capable to produce 40x40x40 cm (64,000 cm3) objects. Ideal for hobbyists and professionals who want to get models and reproductions in PLA, ABS, Nylon, wood and other material that can be melted below 300…
PLA is a tough, easy to use high grade PLA type of filament, ideal for 3D printing. Slightly modified, the filament retains the typical features of PLA, but makes it tougher and less brittle. Due to a low shrinkage factor PLA will not deform after cooling. Poly Lactic Acid is a biodegradable plastic made from…
RTC module (Real Time Clock) based on chip DS3231. It has a 32Kb AT24C32 EEPROM memory to store user data, I2C interface, temperature compensated crystal oscillator (TCXO), 32.768 kHz square wave output pin, 3.3 to 5.5 volt power supply . The RTC allows you to count the seconds, minutes, hours, day, date, month and year…
The ESP32-CAM Development Board of A.I. Thinker (or equivalent) is a module that integrates Wi-Fi 802.11 b / g / n, dual-mode Bluetooth (classic and BLE), small 2 Megapixel camera (OV2640), slot for a mini SD card memory up to 4 GB and I/O 9 pins. A high brightness LED is also present from the…
The turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. This turbidity sensor has both analog…
Those that will be so lucky to be with us at the Rome Maker Faire later this week, will be able to put their maker hands on our very acclaimed (even if never really internationally showcased) … Open Wheels. The Open Wheels is a prototype for an open source clone / replacement of the very…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
