For temperature compensation, temperature measurement and control.
Features
material: epoxy-coated
Specifications
nom. resistance: 1 kohm
B-constant (±7%): 3700°K
max. permissible current: 80mA
thermal dissipation constant: 6mW/°C
thermal time constant: 17sec.
dimensions: Ø5mm
This module uses the principle of optical LASER light scattering to measure the concentration of particulate matter (PM2.5 and PM10) in the air. It consists of a LASER diode, a photodiode, a microcontroller, a low-noise amplifier and a suction fan. The suctioned air passes through the detection chamber, where the LASER light striking the suspended…
The Arduino UNO™ is equipped with 6 analog inputs. Some projects call for more analog inputs, e.g. sensor- or robot projects. This shield only uses 4 I/O lines (3 digital, 1 analog) but adds a whopping 24 inputs, so in total you have 29 analog inputs at your disposal. Features 24 analog inputs uses…
In a previous post, you had the opportunity to discover a new Shield for Arduino, based on Semtech’s SX1278 chip that, in view of a very limited price, allows the implementation of a radio communication for a wide range of applications: from the transmission of digital signals in OOK or FSK mode, to the…
Breakout board based on the integrated 555 (SMD version), one of the integrated circuits that made the history of solid-state electronics. The 555 is a timer that can be configured in various ways incorporating a pair of comparators whose outputs are connected to the SET and RESET inputs of an RS flip-flop, so as to create…
Now we can start describing our first application, that is, the GSM gate controller: in this modality, our system controls the relay it is equipped with whenever it receives a call from a telephone number belonging to a list of numbers previously acquired through a special procedure, which can be performed via SMS using a…
Gearmotor with metal shaft, reduction ratio 120: 1, speed 200 rpm (at 6 VDC), consumption 200 mA. Dimensions (mm): 56x50x23, weight 33 grams. Particularly suitable to make robots. The recommended supply voltage for this motor is 3 to 6 V. …
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
