Guide to Fingerprint Sensor Module with Arduino (FPM10A)
This post is an introductory guide on how to use the Fingerprint Sensor Module with the Arduino. We’ll show you how to enroll a new fingerprint ID, and how to find a fingerprint match.
This post is an introductory guide on how to use the Fingerprint Sensor Module with the Arduino. We’ll show you how to enroll a new fingerprint ID, and how to find a fingerprint match.
“Twinkle, Twinkle, Little Star”? How we wonder why you’d resort to singing a ditty to time your handwashing when you can use your social isolation time to build a touch-free electronic handwash timer that the kids — and you — might actually use. Over the last few months, pretty much everyone on the planet has been…
Ultra Low cost 4 Channel 300KS/s Oscilloscope – Arduino compatible and designed to complement the DIY test bench while being affordable. The kickstarter campaign went off with a bang, nearly 200% funded and still 11 days to go. If you are a DIY electronic maker, you can’t miss a nice oscilloscope for less than $30….
Being really open source is no joke. Open sourcing an hardware product, usually goes through several major steps. The first one is usually verifying that all the software is really open source, Free to use and adapt and accessible. It’s very important to stress this point, there’s a big difference in freeware (and in general…
Dear maker Anthony DiPilato, that is forward thinking! “It’s just used for pulling the plane out of the hangar and putting back in. It’s stored in the hangar. There are some tugs small enough to put in a plane but this one weighs about 200lbs so it’s not really portable. Once the plane is out…
In this project we will see how a machine was built that takes out your tea bag when the previously set time expires. The Steampunk-style structure was built with 4mm plywood cut out using a laser engraver. As for the electronics, there is an Arduino Nano that controls a servo motor after the set time…
It is halfway between an Arduino Mini (in size) and an Arduino Mega in terms of computational capacity, available memory and integrated peripherals. Since the creation of the Arduino project and the subsequent spread of the original boards, the electronics industry and especially the nascent electronics industry for Makers, has moved in two directions:…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.