A series of Robot Kits for the future engineer. Build this kit and find out how much fun electronics, mechanics or hydraulics can be! This mission-based, entry level STEM (Science – Technology – Engineering – Mathematics) coding robot is designed to inspire users to learn about mechanical engineering and coding basics. It encourages children to…

Small board for the Mercury system with a prototyping area and provision for mounting a connector on which to insert the ESP8266 Wi-Fi module (not included). Ideal for adding Wi-Fi connectivity to the Base Board (BB).   Mercury System   The Mercury System (MS in short) is a modular system for the development of connectivity…

Compact 8-channel logic analyzer, used for testing and analyzing digital circuits, connects to the PC’s USB port allowing data to be acquired for more detailed analysis. Maximum sampling frequency 24 MHz. Supports 10 different communication standards: CAN, DMX-512, I²C, I2S / PCM, Manchester, 1-Wire, Async Serial, Simple Parallel, SPI, UNI / O. Fully compatible with…

The ESP32-CAM Development Board of A.I. Thinker (or equivalent) is a module that integrates Wi-Fi 802.11 b / g / n, dual-mode Bluetooth (classic and BLE), small 2 Megapixel camera (OV2640), slot for a mini SD card memory up to 4 GB and I/O 9 pins. A high brightness LED is also present from the…

Polycrystalline photovoltaic panel with compact dimensions and high output efficiency, ideal for recharging batteries, smartphones, robotics, etc. Output voltage: 6 volts, power: 10 watts, current: 1.66 A, dimensions (mm): 340x220x3, weight: 270 grams (including cable).       Go to Open-Electronics Store

Based on the ATmega328P, the DAGU’s T’REX driver board is a board capable of controlling the speed and direction of rotation of two DC motors with a continuous 9 A current (40 A peak) and 4 RC servos. Equipped with a 3-axis accelerometer and self-resetting fuses (PTC), it can be controlled in I2C, RC mode…

Based on the ESP03 Wi-Fi module, this small and compact board (in Kit), allows you to detect the environmental parameters (of a room or a place in your home or any other kind of building) and publishes the data on Cloud. It can work for years, powered by two simple stylus batteries, without the need…

These IC hooks cables come in a set of 10 colors. They provide a nice strong grip on SOICs, TQFPs, anything with 0.6mm pin pitch or larger. Pack containing 10 colored cables, about 25 cm long, with 1 pin female connector on one side and Blue IC hooks on the other. Go to Open-Electronics Store

These IC hooks cables come in a set of 10 colors. They provide a nice strong grip on SOICs, TQFPs, anything with 0.6mm pin pitch or larger. Pack containing 10 colored cables, about 25 cm long, with 1 pin female connector on one side and yellow IC hooks on the other. Go to Open-Electronics Store

Tobbie II is a robot to be built (in kit), composed of 6 legs and a free rotation body, equipped with all the necessary electronic components, including an engine, an infrared sensor and a buzzer to make it active and interactive for the maximum of fun. Ideal in combination with Micro: bit: use your creative…

The TTGO LoRa32 board is an ESP32 with a built-in SX1276 LoRa chip and an SSD1306 OLED display. This is the best board to experiment with LoRa The box includes: the TTGO LoRa32 board, the antenna 868 MHz and the cable U.FL to SMA.   clicca sull’immagine per ingrandire   Features   ESP32: Go to Open-Electronics…

Shield for Arduino based on the VLSI Ogg Vorbis / MP3 / AAC / WMA / MIDI audio decoding chip (VS1053B) produced by VLSI. It allows generating a certain number of musical notes by synthesizing the sounds of a large number of musical instruments, both melodic and percussion, behind commands given by a data channel;…