Breakout board compatible with the XBee format and equipped with the HC-05 Bluetooth module. It is particularly suitable for use with the “Bluetooth Shield” (not included – see related products) specially designed to accommodate three different types of Bluetooth modules (HC-05, BLECC2541, BLE40). Breakout board dimensions with bluetooth a module (mm):…
Breakout board compatible with the XBee format and equipped with the Bluetooth 4.0 (Low Energy) module of the Texas Instruments CC2541. It is particularly suitable for use with the “Bluetooth Shield” (not included – see related products) specially designed to accommodate three different types of Bluetooth modules (HC-05, BLECC2541, BLE40). Breakout…
Breakout board compatible with the XBee format and equipped with the Bluetooth 4.0 (Low Energy) module of the Texas Instruments CC2540. It is particularly suitable for use with the “Bluetooth Shield” (not included – see related products) specially designed to accommodate three different types of Bluetooth modules (HC-05, BLECC2541, BLE40). Breakout…
This shield has been specially designed to accommodate three different types of Bluetooth modules (HC-05, BLECC2541, BLE40), each of which is supplied already soldered on support (breakout board) compatible with the X-BEE format. The shield has the purpose of adapting the voltage levels between Arduino working at 5V and the modules…
12 Vdc to 220 Vac inverter with modified sinusoidal output waveform and maximum power of 300 watts. The inverter is equipped with overload protection, input overvoltage, short circuit and low battery alarm. It has USB output (5 V – 500 mA), Schuko socket and can be used to power: TV, VCR, PC, HI-FI systems, refrigerators,…
Cutter in steel with high carbon content. This precision and high-quality instrument is particularly suitable for assembly and precision cutting operations on electronic circuits. Conductive handle suitable for dissipating any electrostatic discharge. …. Read more: Electrical cutter & Stripper with conductive handle
12 Vdc to 220 Vac inverter with modified sinusoidal output waveform and maximum power of 600 watts. The inverter is equipped with overload protection, input overvoltage, short circuit and low battery alarm. It has USB output (5 V – 500 mA), Schuko socket and can be used to power: TV, VCR, PC, HI-FI systems, refrigerators,…
Gearmotor with metal shaft, reduction ratio 120: 1, speed 200 rpm (at 6 VDC), consumption 200 mA. Dimensions (mm): 56x50x23, weight 33 grams. Particularly suitable to make robots. The recommended supply voltage for this motor is 3 to 6 V. …
The turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. This turbidity sensor has both analog…
Mini servo with metal gears complete with accessories. Reduction ratio: 320: 1 Power supply: from 4.8 Vdc to 6 Vdc Torque to 4.8V: 1.8 kg / cm Consumption in stall: 300 mA (4.8 V) Rotation: 180 ° Speed without load (4.8 V): 0.12 sec / 60° Dimensions (mm): 22.6×11.8×26.7 Weight: 12 grams Operating temperature: from…
Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module or Upgrade firmware….
ATHENA32 is an evaluation board designed to allow the user to experiment with a broad range of peripheral of PIC32MX family without the need of additional boards or devices. It has been specifically designed to address the SW development process with Microchip 32-bit line of controllers using Microchip official toolchain (in particular MPLab X, XC32…
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
