Board all-in-one based on ATmega2560 processor, suitable to carry out motion control applications, both balancing robots or of any device on two wheels. The card comes with the microcontroller already programmed with the bootloader pre-installed, so that it can be programmed directly from the IDE Arduino. N.B. the Xbee module and accelerometer are not included. …
Full Spectrum LED Grow Light Bulb – 80 W. It has 78 LEDs with red light, 24 with blue light, 6 with white light, 6 with infrared light and 6 with UV light. Voltage: 85-265 VAC, power consumption: about 20 watt, base: E27. It is indicated to obtain benefits in the growth and…
Based on the ISD1730 chip, this card allows you to record and play voice messages of up to 20 seconds. The card has a microphone, audio input, 8 ohm speaker, AUX output, function control buttons and an LED that lights up when the chip is being recorded. Power supply from 2.4 V to 5.5…
Water cooler to be used in combination with a 120×120 mm cooling fan. Maximum dimensions (mm): 155,50×120,50×32,50. The distance between fixing holes for the fan: 104 mm, the distance between water pipe connections: 67.50 mm, the internal diameter of fittings: 11 mm. Ideal for 3D choco printer Read more: Radiator for fan 120x120mm
Chassis specially designed to make a crawler robot able to move on rough terrain and able to transport a load of about 5 kg. Includes 2pcs 45 mm wide tracks, 2pcs gearmotors with hall effect encoders and an aluminum alloy frame. Once assembled its dimensions max….
Motor driver able to manage 2 DC motors with a supply voltage between 7 Vdc and 35 Vdc and a max of 10 A for each channel. It can be controlled in RC mode (modeling receiver), Analog, PWM from a microcontroller (Arduino or other) and…
Arduino MKR VIDOR 4000 is a compact FPGA (Field Programmable Gate Array) development board based on Intel® Cyclone® 10CL016, offering 16K logic elements, 504Kbit of embedded RAM, and 56 18-bit x 18-bit hardware multipliers for highspeed DSP applications. The FPGA pins can toggle up to 150MHz and can also be configured as common communications ports such…
Based on the ATmega32u4 microcontroller and the Atheros AR9331, Turquoise is 100% compatible with board Arduino YUN. The Atheros processor supports a Linux distribution based on OpenWRT wireless stack named Linino. In addition to Linux commands like cURL, you can write your own shell and python scripts. Turquoise is equipped with a 10/100 Mbit/s…
Arduino MKR WAN 1300 (LoRa Connectivity) combines the functionality of the MKR Zero and LoRa connectivity. The board is a cost-effective solution for makers seeking to add Lo-Ra connectivity to IoT projects with minimal experience in networking. The MKR WAN 1300 is based on the Atmel SAMD21 and a Murata CMWX1ZZABZ…
Arduino MKR WIFI 1010 is designed to quickly and easily add Wi-Fi connectivity to any Arduino MKR based application. The board is composed of three main blocks: SAMD21 Cortex-M0+ 32bit Low Power ARM MCU; U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi; and ECC508 Crypto Authentication. (datasheet) …
Arduino MKR FOX 1200 has been designed to offer a practical and cost effective solution for makers seeking to add SigFox connectivity to their projects with minimal previous experience in networking. It is based on the Atmel SAMD21 and a ATA8520 SigFox module. The design includes the ability to power the board using two 1.5V…
Fully automatic switching battery charger with IP65 protection rating. Allows charging of 12 volt acid lead type EFB, AGM, GEL, etc. Controlled by a microcontroller, it performs the diagnosis and the battery charge in total autonomy. Comes complete with cables with insulated pliers. …
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
