4WD WiFi Robot Car with ESP32-CAM Camera – Kit

The 2 Megapixel camera (OV2640) delivers sharp, detailed images, while the micro-SD card slot (up to 4 GB) lets you store the captured data. A total of 9 I/O pins provide connectivity and customisation options. On top of that, the high-brightness LED on the front can be used as a FLASH to improve visibility in poor light, or as a lamp for the scene being captured.

Programming the Robot Car is easy with the Arduino IDE, and sketches (example sketches included in the box) are uploaded through a dedicated programming interface for the ESP32-CAM. The clear, detailed assembly instructions make it extremely easy to put together.

This kit is a hands-on way to explore electronics, programming and robotics, and a foundation for learning and building more advanced skills.

No soldering iron is needed.

• Programmable through the Arduino IDE.
• Low-power 32-bit dual-core application CPU.
• Main clock up to 240 MHz, computing power up to 600 DMIPS.
• 520 KB built-in SRAM, 4M external PSRAM.
• Supports several interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
• Works with OV2640 and OV7670 cameras, with built-in flash.
• Image upload over WiFi.
• Supports TF (microSD) cards and offers several sleep modes.
• Embeds LwIP and FreeRTOS, supports STA/AP and STA+AP working modes.
• Supports quick setup with Smart Config/AirKiss, one click to join a network.
• Open to custom development.

• Full product documentation

• During programming, that is after compiling, the Arduino IDE tells me that the COM port is not accessible, or that there is a communication problem with the device that is not down to the hardware.
  Some devices may work correctly even though they are based on the CH340. We recommend uninstalling the drivers and installing them again. Click here to download the driver removal/installation tool.