“S” type load cell – 100 kg range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 100 kg range and two M12 threaded holes
Robotics
426 products
Narrow by category
-
Sensors -
Sensors“S” Type Load Cell – 500 kg Range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 500 kg range and two M12 threaded holes
-
Sensors“S”-type load cell, 200 kg range
€52.46excl. VAT€64.00incl. VATS-type load cell made of stainless steel, C3 accuracy class, 200 kg range and two M12 threaded holes
-
Accessories“U” bracket for the G15 Cube Servo
€3.28excl. VAT€4.00incl. VAT“U” bracket that, combined with the G15 Cube Servo, lets you build moving joints for robots, such as multi-joint robotic arms and so on
-
Sensors1 kg load cell
€5.74excl. VAT€7.00incl. VATLoad cell made up of a metal body and small elements called strain gauges fitted at precise points on that body
-
Control electronics1-Channel DC Motor Driver 30 A
€44.26excl. VAT€54.00incl. VATCompact power driver able to run 1 DC motor with a supply voltage of max
-
Control electronics1-channel DC motor driver 6-30V – 20A
€27.87excl. VAT€34.00incl. VATThe MD20A provides bidirectional control of a brushed DC motor with a supply voltage between 6 and 30 VDC and a current of 20 A. It uses an NMOS H-bridge for better efficiency, which means no heatsink is needed
-
Actuators1-Channel Relay Module 5 Vdc 10 A (Assembled)
€4.10excl. VAT€5.00incl. VATModule with 1 relay to switch the connected load on and off, 240 V/10 A (max)
-
Control electronics1-Motor DC Driver, 40A – 4 Control Modes
€80.33excl. VAT€98.00incl. VATCompact power driver able to control 1 DC motor with a supply voltage between 10 VDC and 45 VDC and a max current
-
Actuators1-relay module 5 Vdc, low-level trigger (assembled)
€2.05excl. VAT€2.50incl. VATModule with 1 relay, two status LEDs (power and relay), a transistor and a diode
-
Actuators1.8kg/cm Mini Servo Motor, Metal Gears, 180°
€6.56excl. VAT€8.00incl. VATMini servo with metal gears, accessories included
-
Sensors10 kg Load Cell
€5.74excl. VAT€7.00incl. VATLoad cell made up of a metal structure and small elements called strain gauges mounted at precise points on the structure
-
Accessories10 Mounting Brackets for Metal Micro Gearmotors
€2.13excl. VAT€2.60incl. VAT10 brackets for MMG-series metal micro gearmotors.
-
Actuators -
Actuators12 VDC Gearmotor – 30 rpm – 8 kg·cm
€10.66excl. VAT€13.00incl. VAT12 Vdc gearmotor with a 200:1 reduction ratio, maximum torque 8 kg·cm, speed under load: 30 rpm, direction of rotation set by polarity
-
Motors12 Vdc Stepper Motor – 64 Steps, 1/64 Gearbox
€13.11excl. VAT€16.00incl. VATIdeal for any application that calls for precise angular positioning and rotation speed, such as robotics and servo mechanisms.
-
Robots12-in-1 Solar Robot Kit with Hydraulic Movement – Build, Learn and Have Fun!
€31.15excl. VAT€38.00incl. VATA way into the world of electronics and robotics while learning and having fun! The kit lets you build up to 12 different models with hydraulic movement, powered by solar energy
-
Actuators12V Gear Motor – 250 rpm
€7.95excl. VAT€9.70incl. VATHigh-quality DC gear motor with a 21:1 reduction ratio. Ideal for applications requiring increased torque and reduced speed.
-
Actuators16-Channel 12-Bit PWM/Servo Driver – PCA9685
€6.97excl. VAT€8.50incl. VATBased on the PCA9685 chip, this compact board can drive up to 16 RC servos or LEDs at the same time
-
Actuators16-RELAY BOARD
€60.66excl. VAT€74.00incl. VATBoard complete with 16 relays and the matching connector for the contacts