2 DC Motor / 1 Stepper Motor Driver Shield – 10 A
€26.23excl. VAT€32.00incl. VATArduino shield based on an H-bridge made up of 8 NMOS transistors which, besides improving efficiency, remove the need for a heatsink
Robotics
426 products
Narrow by category
-
Control electronics -
Actuators2 Pololu 32×7 Wheels for MMGxxx Gearmotors
€4.84excl. VAT€5.90incl. VATPack containing a pair of white plastic wheels with tyres
-
Control electronics2-Channel Infrared Remote Control
€2.87excl. VAT€3.50incl. VATFitted with 2 buttons, this infrared remote control, paired with an IR receiver, can be used to turn lights or other devices on and off
-
Sensors2-Channel IR Reflective Sensor
€4.84excl. VAT€5.90incl. VATSet made up of two TCRT5000 reflective sensors and a small control board based on the LM393 chip. When one of the sensors comes close to a light-coloured object, the strength of the received signal rises and the LED on the control board turns red (digital output high)
-
Actuators2-Relay Module 30A 250VAC
€9.84excl. VAT€12.00incl. VATModule equipped with 2 power relays that allows you to switch the load connected to them on/off with a maximum current of 30 A (250 VAC/30 VDC)
-
Actuators2-Relay Module 5 Vdc 10A (assembled)
€5.74excl. VAT€7.00incl. VATModule with 2 relays for switching the load connected to them on and off, 240V/10A (max).
-
Robots2-Wheel Mini Rover – Kit
€5.66excl. VAT€6.90incl. VATOriginal kit that, once every component has been fitted and soldered, builds a small rover that follows a black line. The sensor that lets the rover detect and follow the line uses two white LEDs and two photoresistors
-
Sensors20 A current sensor
€4.84excl. VAT€5.90incl. VATBuilt around the Allegro ACS712ELCTR-20A-T chip, this current sensor reads AC or DC currents between 0 and 20 A
-
Sensors20 kg load cell
€5.74excl. VAT€7.00incl. VATLoad cell made up of a metal body and small elements called strain gauges bonded at precise points on that body
-
Sensors25 VDC Voltage Sensor
€1.23excl. VAT€1.50incl. VATBuilt around a voltage divider with two resistors, this voltage sensor scales the incoming voltage down by a factor of 5
-
Motors3 – 6 Vdc 300 mA Motor – 15000 rpm
€1.07excl. VAT€1.30incl. VATMiniature general-purpose electric motor, 3 – 6 Vdc / 300 mA.
-
Sensors3-axis accelerometer
€4.51excl. VAT€5.50incl. VATDigital 3-axis accelerometer based on the Freescale MMA8452Q sensor
-
Sensors3-Axis Accelerometer + 3-Axis Gyroscope
€7.38excl. VAT€9.00incl. VATSmall board based on the InvenSense MPU-6050 sensor, which contains a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer
-
Sensors3-Axis Accelerometer with ADXL345
€4.02excl. VAT€4.90incl. VATAnalog 3-axis accelerometer based on the ADXL345 chip by Analog Devices
-
CNC accessories3-axis board set + accessories
€61.48excl. VAT€75.00incl. VATBased on the Toshiba TB6560AHQ chip, it can drive up to 3 bipolar or unipolar stepper motors at 3 A (3.5 A peak)
-
Accessories3-Blade Propeller for Motors
€1.56excl. VAT€1.90incl. VAT3-blade propeller, 40 mm diameter, with a centre hole for motors with a 2 mm shaft
-
Robots3-in-1 Educational Solar Robot Kit – Dinosaur, Insect and Drill
€12.30excl. VAT€15.00incl. VATEducational kit for 3 different solar robots: dinosaur, insect and drill.
-
Control electronics30A Speed Controller for Brushless Motors
€12.30excl. VAT€15.00incl. VATSpeed Controller for Brushless Motors. Ideal for drones, model aircraft and radio-controlled vehicles. Maximum current capacity 30A. 2-4S LiPo BEC at 5V/2A. Voltage range 4V-16V.
-
Actuators4 relay module 5 Vdc 10A (assembled)
€9.02excl. VAT€11.00incl. VATModule with 4 relays for switching the load connected to them on and off, 240V/10A (max)
-
Infrared4-channel IR receiver with remote control
€5.74excl. VAT€7.00incl. VATSet consisting of an IR remote control and a 4-channel momentary receiver