AM2302 Temperature and Humidity Sensor – Wired
€7.79excl. VAT€9.50incl. VATCompact module built around the DHT22 temperature and relative humidity sensor. Its single-wire serial interface makes it easy to use
Robotics
426 products
Narrow by category
-
Sensors -
SensorsAMG8833 Thermal Image Sensor
€45.90excl. VAT€56.00incl. VATBreakout board based on the Panasonic AMG8833 sensor
-
SensorsAmplified microwave motion sensor
€13.52excl. VAT€16.50incl. VATCompact module combining a Doppler microwave motion sensor, a signal amplifier stage (not present on the bare sensor), two status LEDs and a trimmer for setting the detection range from 2 to 16 metres. It has a transmitting section and a receiving section
-
SensorsAnalogue Temperature Module – assembled
€6.56excl. VAT€8.00incl. VATBreakout board built around the LMT84DCKT analogue temperature sensor (SOT-23-5 package) and the Microchip MCP6L01T-E/LT op-amp, which amplifies the voltage the sensor delivers at its output
-
SensorsAPDS-9930 Ambient Light and Proximity Sensor Breakout
€4.10excl. VAT€5.00incl. VATBreakout board built around the Avago APDS-9930 ambient light sensor (ALS) and proximity sensor with infrared LED
-
SensorsAPDS-9960 Gesture Breakout Board
€6.15excl. VAT€7.50incl. VATBuilt around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
-
RobotsArduino TinkerKit Robotic Arm
€294.26excl. VAT€359.00incl. VATThis set contains everything you need to build a robotic arm controllable via Arduino, complete with a gripper for picking up objects and the option to mount cameras, small solar panels, smartphones, etc
-
RobotsArticulated plexiglass robotic arm with 4 degrees of freedom and rotating base
€72.95excl. VAT€89.00incl. VATKit containing everything needed to build an articulated plexiglass robotic arm with 4 degrees of freedom, a rotating base (180°), a gripper for picking up objects and 5 servos that can be driven by Arduino or other electronics
-
RobotsAssorted set of coloured plastic motor gears with propellers, pulleys and accessories
€3.20excl. VAT€3.90incl. VATThis set includes a variety of gears, pulleys, propellers and accessories for building elaborate drive systems and rubber-band motors.
-
ActuatorsAutomatic changeover module 12-48VDC
€5.33excl. VAT€6.50incl. VATCompact automatic changeover module: connect an input voltage between 12 and 48 VDC (12, 24, 36, 48 VDC) and a battery of the same voltage as the input, and the output load (which must run on the same voltage as the input) stays powered even if the input voltage suddenly fails.
-
SensorsAutomatic Watering System for Indoor Plants with Moisture Sensor
€12.30excl. VAT€15.00incl. VATAutomatic watering system for indoor plants with moisture sensor, compatible with Arduino.
-
ActuatorsBall Caster
€8.11excl. VAT€9.90incl. VATThe ball caster is used as the third support point on robots. Made up of a small steel ball that rolls inside a plastic housing, it can be fitted so as to give two different heights, 25 and 35 mm
-
SensorsBall motion sensor
€1.23excl. VAT€1.50incl. VATBall motion sensor with a nickel-plated cylindrical body
-
SensorsBall-Type Vibration and Motion Sensor
€2.05excl. VAT€2.50incl. VATOmnidirectional mechanical motion sensor able to detect movement, tilt or vibration
-
Control electronicsBipolar Stepper Motor Driver 2.2A
€7.79excl. VAT€9.50incl. VATBuilt around the Texas Instruments DRV8825 chip, this small driver can control a single bipolar stepper motor with a max current
-
AccessoriesBlue Robot Chassis
€7.38excl. VAT€9.00incl. VATLaser-cut chassis in transparent blue acrylic, with a diameter (approx. 12.7 cm) slightly larger than a CD; it has many holes and slots for mounting sensors, motors (in particular the DGEARBOX), wheels, ball casters (BCASTER) and more
-
SensorsBME280 – Pressure, humidity and temperature sensor
€9.02excl. VAT€11.00incl. VATUltra-small module (13.3×10.6×3.5 mm) built around the BME280 pressure, humidity and temperature sensor
-
SensorsBMP280 Pressure Sensor
€3.69excl. VAT€4.50incl. VATBased on the Bosch BMP280 digital pressure sensor, it measures absolute ambient pressure and converts the reading into an altitude
-
Control electronicsBoard for PS2 Controller
€26.23excl. VAT€32.00incl. VATFitted with a reset button, a jumper to set the Baud Rate (9600, 57600, 115200), a status LED and a power LED; lets you use the PlayStation 2 wireless (or wired) controller to remotely drive robots or other devices
-
Control electronicsBOMEGA168 – BABY ORANGUTAN MEGA168
€18.03excl. VAT€22.00incl. VATSmall 24-pin (DIP) board fitted with a driver to control two DC motors (max 1 A per motor), a trimmer and two indicator LEDs