CNC Shield for Arduino
€4.10excl. VAT€5.00incl. VATPaired with an Arduino (not included), this shield lets you drive a CNC router or a 3D printer
Robotics
426 products
Narrow by category
-
Control electronics -
SensorsCO2 Sensor Module – MH-Z19B
€48.36excl. VAT€59.00incl. VATMeasures carbon dioxide from 0 to 5,000 ppm with NDIR infrared sensing and reports it on UART and PWM outputs; runs on 5 V.
-
SensorsCO2 sensor module – MH-Z19C
€40.16excl. VAT€49.00incl. VATIntegrate the MH-Z19C sensor into your projects. Lets you monitor CO2 concentration in indoor environments simply and efficiently.
-
Control electronicsCollision Sensor for Robots
€1.64excl. VAT€2.00incl. VATBuilt around a micro switch and a status LED, this small board is ideal for use as an anti-collision sensor on robots
-
Presence & intrusion sensorsCompact PIR Sensor with TTL Output – Adjustable Range up to 7m
€4.10excl. VAT€5.00incl. VATCompact PIR sensor with control board and TTL output (high level 3.3V – low 0V)
-
SensorsCompressed Natural Gas (CNG) sensor
€2.46excl. VAT€3.00incl. VATSensor able to detect natural gas (mainly methane) in the air at concentrations between 300 and 10,000 ppm
-
Control electronicsControl board for 3D printers, CNC machines and plotters
€9.84excl. VAT€12.00incl. VATRAMPS (1.4) is a shield that, paired with an Arduino Mega or compatible board, controls a 3D printer, a small CNC milling machine or a plotter such as our polystyrene cutter (see related products).
-
RobotsCrawling Micro Robot
€14.75excl. VAT€18.00incl. VATMiniature insect-shaped robot in bright colours: it looks for light and always runs towards it, two subminiature motors drive it, LED eyes show which way it is pointing, and it stops in complete darkness.
-
SensorsCurrent Transformer 5 A
€5.33excl. VAT€6.50incl. VATGalvanically isolated current measuring transformer, for use wherever you need to sense current draw without electrical contact with the low-voltage circuit.
-
SensorsD203S motion sensor module
€4.10excl. VAT€5.00incl. VATCompact PIR sensor with motion detection up to 5 metres and a 120° angle, ideal for automation, security and home-automation projects.
-
Control electronicsDAGU AVR DC motor and RC servo controller
€12.30excl. VAT€15.00incl. VATProgrammable through the Arduino IDE and based on the ATmega8A microcontroller, this compact controller can drive 2 DC motors or 8 small RC servos
-
Control electronicsDAGU T’REX Driver board
€72.95excl. VAT€89.00incl. VATBuilt around the ATmega328P, DAGU’s T’REX driver board controls the speed and direction of two DC motors at 9A continuous (40A peak) and 4 RC servos at 6V
-
ActuatorsDC MOTOR 12V/24V (12000 RPM max.)
€10.25excl. VAT€12.50incl. VATThis DC motor works over a wide voltage range between 12V and 24V, fitting different supply requirements perfectly. It builds up a progressive rotation speed that peaks at 12,000 RPM at 24V (about 6,000 RPM at 12V).
-
MotorsDC Motor 6-12V – 3000 rpm
€2.38excl. VAT€2.90incl. VATMotor running on a supply of between 6 and 12 VDC.
-
MotorsDC Motor 6-12V – 3000 rpm
€1.80excl. VAT€2.20incl. VATMotor running on a supply between 6 and 12 VDC.
-
MotorsDC Motor 6-12V – 9000 rpm
€3.11excl. VAT€3.80incl. VATDC motor with a speed of 5000 rpm at 6 VDC and 9000 rpm at 12 VDC.
-
Control electronicsDC motor speed controller 10-40 VOLT 10A
€4.92excl. VAT€6.00incl. VATCompact board that lets you adjust the speed of a DC motor running from 10 V to 40 V and drawing up to 10 A, using a potentiometer
-
Control electronicsDC motor speed controller 3 to 35 V 5A
€4.51excl. VAT€5.50incl. VATCompact little board that lets you adjust the speed of a DC motor, with a supply between 3 V and 35 V and a maximum current of 5 A, through a potentiometer with an on/off switch.
-
SensorsDHT11 Temperature and Humidity Sensor
€2.87excl. VAT€3.50incl. VATThe DHT11 is a temperature (0°C to +50°C) and relative humidity (20% to 90%) sensor. It has a single-wire serial interface that makes it easy to use
-
SensorsDHT11 Temperature and Humidity Sensor Board
€3.69excl. VAT€4.50incl. VATThree-pin output module with DHT11 sensor