Finned aluminium heatsink – 100x69x36mm
€7.79excl. VAT€9.50incl. VATAluminium heatsink with 27 fins for better heat transfer and a lower risk of overheating.
Electronic components + Cooling & heating
45 products
Narrow by category
-
Cooling & heating -
Cooling & heatingFinned Aluminium Heatsink – 69x20x36 mm
€2.87excl. VAT€3.50incl. VATAluminium heatsink with 27 fins for better heat transfer and a lower risk of overheating.
-
Cooling & heatingFinned Aluminium Heatsink – 69x69x36mm
€6.15excl. VAT€7.50incl. VATAluminium heatsink with 27 fins for better heat transfer and reduced risk of overheating.
-
Cooling & heatingFinned aluminum heatsink – 200x69x36mm
€15.57excl. VAT€19.00incl. VATAluminum heatsink, 200x69x36mm, with 27 fins for better heat transfer and reduced risk of overheating.
-
Cooling & heatingHeat sink 15x10x20mm for TO220
€0.33excl. VAT€0.40incl. VATCompact 15x10x20 mm heat sink, designed for TO220 components.
-
Cooling & heatingHeatsink for 3DDRIVER
€0.74excl. VAT€0.90incl. VATAluminium heatsink intended for use with the 3DDRIVER module
-
Peltier cellsHeatsink for 40×40 mm Peltier cell
€9.43excl. VAT€11.50incl. VATMade up of an aluminium heatsink (80x80x30 mm), an aluminium heatsink (60x45x16 mm), an adhesive insulator and an 80×80 mm fan running on 12 VDC, it lets 40×40 Peltier cells (about 51 watt) be used efficiently
-
Cooling & heatingHeatsink with 2 Fans for Raspberry Pi
€9.02excl. VAT€11.00incl. VATTwo small, quiet 25×25 mm fans mounted on a self-adhesive aluminium heatsink that makes fitting to a Raspberry Pi 3 straightforward; it brings the temperature down by up to 20°C
-
Cooling & heatingLM35-based automatic cooling fan control board
Price range: €14.00 through €25.00 incl. VATTurns the cooling system’s fan on and off, depending on the connected system’s detected temperature.
-
Peltier cellsMini cooling system with 1 Peltier cell
€28.69excl. VAT€35.00incl. VATCooling system made up of 1 Peltier cell rated 51 watt, 1 water radiator, a cooling fan and an aluminium heatsink
-
Cooling & heatingMINI INDUCTION HEATER 5-12 VDC
€8.11excl. VAT€9.90incl. VATThis board heats and, if you want, melts electrically conductive and above all ferromagnetic materials, using a ZVS (Zero Voltage Switching) circuit rated at 120 W, which can be pushed to 150 under certain conditions
-
Cooling & heatingML26 Heat Sink
€1.23excl. VAT€1.50incl. VATHeat sink for TO220 package components, thermal resistance: 18°C/W.
-
Peltier cellsPeltier Cell 27W 30×30 mm
€13.52excl. VAT€16.50incl. VATSolid-state heat pump running on 12 V at 3.2 A: it reaches a 68 °C difference between the hot and the cold side.
-
Peltier cells
Peltier Cell 51W 40×40 mm
€14.34excl. VAT€17.50incl. VATSolid-state heat pump running on 12 V and drawing 6.4 A maximum, to cool or heat by direct contact.
-
Peltier cellsPeltier Cell 5W 12×12 mm
€6.97excl. VAT€8.50incl. VATSolid-state heat pump powered at 4 V with 2.1 A: reaches a 70 °C difference between the two sides and has 125 mm long wires.
-
Cooling & heatingProtective Grille for 40×40 mm Fans
€1.23excl. VAT€1.50incl. VATMetal protective grille for 40×40 mm cooling fans.
-
Cooling & heatingSet of 3 heatsinks for Raspberry Pi
€1.23excl. VAT€1.50incl. VATSet of 3 self-adhesive aluminium heatsinks made for use with Raspberry Pi
-
Cooling & heatingSet of 4 aluminium heatsinks for Raspberry Pi4
€1.56excl. VAT€1.90incl. VATSet of 4 self-adhesive aluminium heatsinks, designed for use with the Raspberry Pi 4 and other boards
-
Peltier cellsSTEM – DIY Electronic Mini Fridge with Peltier Cell – 12V – Kit
€42.62excl. VAT€52.00incl. VATDIY semiconductor mini fridge with Peltier module, perfect for introducing the principles of thermoelectricity in a STEM setting.
-
Cooling & heatingSunon 220 VAC Axial Fan – 120x120x38 mm
€21.31excl. VAT€26.00incl. VATSunon axial fan 120x120x38, 220 VAC supply.