16×2 Display Expansion Board for the Mercury System
€18.85excl. VAT€23.00incl. VATExpansion board for the Mercury system carrying a 16×2 alphanumeric LCD display
45 products
IoT (Internet of Things)Expansion board for the Mercury system carrying a 16×2 alphanumeric LCD display
IoT (Internet of Things)3-channel board that interfaces with Neopixel LED strips or rings
ESP8266 / ESP323.5-inch TFT display with a capacitive touch screen, ILI9488 graphics controller, ESP32-S3 module and SD card slot.
IoT (Internet of Things)6-channel servo board able to generate and hold an RC servo control signal on each channel
IoT (Internet of Things)Expansion board for the Mercury system with a single-channel relay able to switch loads up to 10A
Bluetooth modulesSmall, compact Bluetooth module for the Smart Everything Fox board
IoT (Internet of Things)Adds a Bluetooth link to a Mercury system, the modular IoT platform whose boards plug one into the other.
IoT (Internet of Things)Brainless Board for the Mercury system (BL), providing a prototyping platform for adding generic slave functions to an MS Base Board (BB).
FishinoClear protective case made of 2 mm thick plexiglass, sized to house the Fishino Uno (the version shown in the photo)
FishinoClear protective case made of plexiglass (2 mm thick), designed to house the Fishino32
FishinoClear protective enclosure made of plexiglass (2 mm thick), sized to house the Fishino Mega
IoT (Internet of Things)Slave Board for the Mercury System based on the PIC16F1829 microcontroller and fitted with the DHT22 temperature and humidity sensor. It has a four-position dip switch to set the board’s bus address dynamically, a user LED, a Mercury connector and a connector for the Microchip PicKit 3 programmer, wired directly to the microcontroller’s debug port for advanced debug and programming features. The DHT22 sensor measures temperatures between -40°C and +80°C (with ± 0.5°C accuracy) and humidity between 0% and 100%, (with 2.5% accuracy).
IoT (Internet of Things)The Expansion Board is a board that lets you connect Mercury boards side by side, such as the Base Board, the Relay Slave Board, the Bluetooth Modem Board and so on.
Wi-Fi modulesESP-01M WiFi transceiver module based on the ESP8285 chip, compatible with the 802.11 b/g/n standard at 2.4 GHz. The module integrates the RF antenna and 11 GPIO pins plus one ADC pin and hardware serial.
Wi-Fi modulesSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz; it has a built-in TCP/IP stack, 19.5 dBm output power, data interfaces (UART / HSPI / I2C / I2S / Ir Remote Control GPIO / PWM) and a PCB antenna
Wi-Fi modulesSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with SPI interface, 7 GPIOs, TCP/IP stack and ceramic antenna on the PCB
ESP8266 / ESP32Board based on the ESP32 (ESP-WROOM-32) with Wi-Fi 802.11 b/g/n, Bluetooth and 32 GPIO.
ESP8266 / ESP32Compact Open Source development and prototyping board built around the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE) and 25 GPIO.
ESP8266 / ESP32Compact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIOs.
ESP8266 / ESP32Compact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), integrating 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIO.
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.