Metal CR2032 Battery Holder – SMD Mount
€0.57excl. VAT€0.70incl. VATMetal battery holder for PCB mounting, with SMD solder terminals
Batteries & power
277 products
Narrow by category
-
Battery holders -
Mobile phone accessoriesMICRO USB MOBILE POWER BANK BOARD
€2.87excl. VAT€3.50incl. VATPower bank module fitted with dual USB output, 5V-2A and 5V-1A
-
Battery chargersMPPT Charger for LiPo Batteries
€6.15excl. VAT€7.50incl. VATBased on the CN3791 chip and fitted with two status LEDs, this compact charger with MPPT (Maximum Power Point Tracking) technology lets you charge a 3.7-volt lithium polymer battery using a small solar panel with a 6-volt output
-
Battery testersMultifunction digital car battery tester 12V 24V
€40.16excl. VAT€49.00incl. VATPortable tester for 12V and 24V car batteries, built for a quick check of battery health, cranking capability and the charging system. Suited to workshops, auto electricians, maintenance technicians and advanced users who want an immediate reading of voltage, internal resistance and CCA without disconnecting the battery from the vehicle.
-
Rechargeable batteriesNi-MH Rechargeable Battery 1.2V – 2100 mAh type AA
€3.69excl. VAT€4.50incl. VATReady-to-use rechargeable battery with low self-discharge. Ni-MH 1.2 V / 2100 mAh type AA
-
Battery protectionNickel strip 8 mm x 0.1 mm for spot welding – 10m
€11.07excl. VAT€13.50incl. VATPure nickel strip 8 mm x 0.1 mm for building lithium battery packs safely by spot welding.
-
Non-rechargeable batteriesPanasonic Zinc Air Batteries 1.4 V – Pack of 6
€4.51excl. VAT€5.50incl. VATSix 180 mAh zinc-air cells in the PR41 size used by hearing aids; price is per pack.
-
DC/DC convertersPanel-Mount Step-Down Power Supply Module 0-50V – 0-5A
€52.46excl. VAT€64.00incl. VATThis programmable module lets you set a constant output voltage or current, pairing analogue integration with digital controls
-
Battery holdersPCB battery holder for 1 x 18650 cell
€0.74excl. VAT€0.90incl. VATPlastic battery holder for PCB mounting, designed to take one 18650 Li-Ion battery
-
Battery holdersPCB Battery Holder for 12V Type 23A Cell
€0.25excl. VAT€0.30incl. VATPlastic battery holder with solder terminals for printed circuit board, taking 1 12 V type 23A battery (A23, 8LR23, ANSI-1181A, MN21, MS21, V23GA, VR22, 1811A, 3LR50, LR-V08, SES-23A, EL1 )
-
Battery holders -
Battery holdersPCB-Mount Battery Holder for 4 x 18650 Cells
€2.38excl. VAT€2.90incl. VATPlastic battery holder for PCB mounting, designed to take four 18650 Li-Ion cells. The cells fitted are not connected to each other: you can wire them as you prefer (in series or in parallel) directly on your own PCB
-
Battery chargersPower Bank Shield for 18650 Lithium Batteries
€6.97excl. VAT€8.50incl. VATThis shield offers 3V/1A and 5V/2.2A outputs, with high efficiency and room for up to two 18650 lithium batteries.
-
Mains power suppliesPower supply for Raspberry Pi 5 and Pi 4 USB-C 27W
€12.70excl. VAT€15.50incl. VATUSB-C power supply with 27 W Power Delivery, designed for Raspberry Pi 5. Supports multiple voltages and is also suitable for configurations with high-consumption peripherals.
-
Mains power suppliesPower Supply Module 220 VAC to 3.3 VDC – 3 W
€4.51excl. VAT€5.50incl. VATSmall PCB-mount power supply module with 100-220 VAC input voltage, 3.3 VDC output voltage and 3 watts of power
-
Mains power suppliesPower Supply Module 220 VAC to 5 VDC – 2 W
€3.77excl. VAT€4.60incl. VATSmall PCB-mount power supply module with 100-220 VAC input voltage, 5 VDC output voltage and 2 watts of power. Dimensions: 30×16.4x19mm
-
Mains power suppliesPower Supply Module 220 VAC to 5 VDC – 3 W
€4.51excl. VAT€5.50incl. VATSmall PCB-mount power supply module with 100-220 VAC input voltage, 5 VDC output and 3 watts of power
-
Bench power suppliesProgrammable Laboratory Power Supply 0-30 V / 5 A
€159.84excl. VAT€195.00incl. VATProgrammable bench power supply with output voltage adjustable from 0 to 30 Vdc and 5 A maximum current
-
Battery protectionProtection Module for 1S Li-Ion Battery Packs 3.7V – 5A
€2.38excl. VAT€2.90incl. VATProtection module for 3.7V – 5A Lithium-Ion battery packs, designed to ensure safety and efficient management of lithium batteries in 1S configuration. It features protection against overcharge, over-discharge, overcurrent and short circuit, ensuring long life and reliable performance for battery packs.
-
InvertersPure Sine Wave Inverter 600W – 12V to 220VAC + USB
€145.90excl. VAT€178.00incl. VAT12 VDC to 220 VAC inverter with a pure sine wave output and a maximum power of 600 Watt