1,250 products
SensorsBuilt around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
Buttons, switches & joysticksVery similar to the buttons used in arcade machines, it has a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery similar to the buttons used in arcade machines, it carries a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery similar to the buttons used in arcade games, it has a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery similar to the buttons used in arcade machines, it has a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery similar to the buttons used in arcade machines, it has a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery much like the buttons used in arcade machines, it comes with a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksPanel-mount push button for arcade cabinets, with a three-terminal 3 A microswitch: 35 mm bezel and 28 mm mounting hole.
Buttons, switches & joysticksVery close to the buttons used in arcade machines, it has a 3-terminal microswitch (common, normally open and normally closed) rated 3 A at 125 Vac
Buttons, switches & joysticksPanel-mount pushbutton for arcade cabinets, with a 3 A three-terminal microswitch: 35 mm bezel and 28 mm mounting hole.
DisplaysShield for Arduino Uno built around a 3.5″ TFT LCD display with resistive touch screen, ILI9486 graphics controller, 480×320 pixel resolution, 65,000 colours, white LED backlight, SD card slot and SPI interface
Component setsSet containing the following horizontal-mount trimmers:
Component setsThis assortment includes 15 values of radial inductors, 5 pieces of each, for a total of 75 components.
GPSHigh-precision GPS module with active antenna included, ideal for projects with Arduino, ESP32 and Raspberry Pi.
MicrocontrollersAtmel ATMega328 8 bit microcontroller with Bootloader for Arduino UNO
MicrocontrollersAtmel ATMEGA328P-PU 8-bit microcontroller
MicrocontrollersAtmel microcontroller from the ATtiny25 family with 2 kbytes of program memory, 128 bytes of EEPROM, 128 bytes of SRAM, 6 Input/Output lines, 1 timer, maximum clock rate 10 MHz, 10-bit ADC, SPI/USI interface
MicrocontrollersAtmel ATTINY85-20PU microcontroller from the ATtiny85 family, with 8 kbytes of program memory, 512 bytes EEPROM, 256 bytes SRAM, 6 Input/Output lines, 2 timers, maximum clock rate of 20MHz, 10-bit ADC, and SPI/USI interface
Cooling & heatingFan speed controller based on the TC648 chip
SensorsAutomatic watering system for indoor plants with moisture sensor, compatible with Arduino.
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
