Aluminium Enclosure – 120x95x36 mm
€7.38excl. VAT€9.00incl. VATLightweight, corrosion-resistant aluminium enclosure, 2 mm thick, with rounded corners and stainless steel screws.
Components & enclosures
1,250 products
Narrow by category
-
Enclosures -
EnclosuresAluminium enclosure – 145x121x39.5 mm
€12.30excl. VAT€15.00incl. VATLightweight, corrosion-resistant aluminium enclosure, 2 mm thick, with rounded corners and stainless steel screws.
-
EnclosuresAluminium Enclosure – 188x120x37 mm
€15.98excl. VAT€19.50incl. VATLightweight, corrosion-resistant aluminium enclosure, 2 mm thick, with rounded corners and stainless steel screws.
-
EnclosuresAluminium enclosure – 254x71x52.5 mm
€16.80excl. VAT€20.50incl. VATLightweight, corrosion-resistant aluminium enclosure, 2 mm thick, with rounded corners and stainless steel screws.
-
EnclosuresAluminium enclosure – 50.5×50.5×31 mm
€6.56excl. VAT€8.00incl. VATLightweight, corrosion-resistant aluminium enclosure, 2 mm thick, with rounded corners and stainless steel screws.
-
Cooling & heatingAluminium Heatsink 40x40x11
€2.38excl. VAT€2.90incl. VATHeatsink to be used together with a 40×40 fan (not included)
-
Cooling & heatingAluminium Heatsink for Power LEDs
€3.69excl. VAT€4.50incl. VATFinned aluminium heatsink, particularly suitable for dissipating the heat of a 10-watt power LED (not included). Dimensions (mm): 90 (diameter) x 10 (thickness), LED fixing holes (4): 3 mm.
-
Cooling & heatingAluminium heatsink with 12 volt fan
€3.69excl. VAT€4.50incl. VATAluminium heatsink with a 12 volt fan drawing 0.1 A
-
EnclosuresAluminum Enclosure – 92x38x31 mm
€6.15excl. VAT€7.50incl. VATLightweight, corrosion-resistant aluminum enclosure, 2 mm thick, with rounded corners and stainless steel screws.
-
Cooling & heating -
RF receiversAM Receiver 433 MHZ 3V – High Sensitivity
€6.97excl. VAT€8.50incl. VATMiniature AM superheterodyne receiver with high input sensitivity and high immunity to interfering electromagnetic fields
-
SensorsAM2302 Temperature and Humidity Sensor – Wired
€7.79excl. VAT€9.50incl. VATCompact module built around the DHT22 temperature and relative humidity sensor. Its single-wire serial interface makes it easy to use
-
SensorsAMG8833 Thermal Image Sensor
€45.90excl. VAT€56.00incl. VATBreakout board based on the Panasonic AMG8833 sensor
-
SensorsAmplified microwave motion sensor
€13.52excl. VAT€16.50incl. VATCompact module combining a Doppler microwave motion sensor, a signal amplifier stage (not present on the bare sensor), two status LEDs and a trimmer for setting the detection range from 2 to 16 metres. It has a transmitting section and a receiving section
-
Buttons, switches & joysticksANALOGUE RESISTIVE THUMB JOYSTICK
€5.90excl. VAT€7.20incl. VATSmall analogue resistive joystick, very much like the one found on the PSP1000
-
SensorsAnalogue Temperature Module – assembled
€6.56excl. VAT€8.00incl. VATBreakout board built around the LMT84DCKT analogue temperature sensor (SOT-23-5 package) and the Microchip MCP6L01T-E/LT op-amp, which amplifies the voltage the sensor delivers at its output
-
Buttons, switches & joysticksAnti-vandal push button 16 mm – blue LED
€4.10excl. VAT€5.00incl. VATMetal anti-vandal push button, OFF/(ON) type, with NC/NO/C contacts (normally open / closed and common) and LED illumination (+ and – contacts)
-
Buttons, switches & joysticksAnti-vandal selector switch 16 mm – blue LED
€3.93excl. VAT€4.80incl. VATMetal anti-vandal OFF/ON selector switch with NC/NO/C contacts (normally open / closed and common) and LED illumination (+ and – contacts)
-
Buttons, switches & joysticksAnti-vandal switch 16 mm – white LED
€3.93excl. VAT€4.80incl. VATMetal anti-vandal OFF/ON switch with NC/NO/C contacts (normally open / closed and common) and LED illumination (+ and – contacts)
-
SensorsAPDS-9930 Ambient Light and Proximity Sensor Breakout
€4.10excl. VAT€5.00incl. VATBreakout board built around the Avago APDS-9930 ambient light sensor (ALS) and proximity sensor with infrared LED