74LS90 – IC DIP decade counter
€1.56excl. VAT€1.90incl. VAT74LS90 DIP decade counter integrated circuit, DIP14.
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Special functions -
Cable reels75 dB Coaxial Antenna Cable – 50 metre reel
€12.30excl. VAT€15.00incl. VAT50 metre reel of 75 dB coaxial antenna cable, double screened, with a mixed copper/steel inner conductor
-
Voltage regulators -
Voltage regulators
-
Voltage regulators
-
Voltage regulators
-
Voltage regulators -
Voltage regulators
7908 – Negative voltage regulator -8 V
€0.98excl. VAT€1.20incl. VATNegative voltage regulator, -8 V, TO220 package.
-
Actuators7×16 mm DC Micro Motor – 40,000 rpm
€2.05excl. VAT€2.50incl. VATMicro motor with a rotation speed of 40,000 rpm, a 3.7 VDC supply and a current draw of 110 mA (1.54 A when stalled)
-
Raspberry Pi8 Megapixel Camera Module for Raspberry Pi
€36.07excl. VAT€44.00incl. VATSmall Raspberry Pi module with an 8 megapixel Sony IMX219PQ image sensor and fixed 1/4″ optics
-
Crystals & oscillators8 MHz CRYSTAL
€1.07excl. VAT€1.30incl. VATTime base for microcontrollers and digital circuits: HC-49U package, ±30 ppm tolerance and 30 pF load capacitance.
-
Crystals & oscillators8 MHz Low-Profile Crystal – HC-49US
€1.07excl. VAT€1.30incl. VATLow-profile HC-49US timing crystal with ±50 ppm tolerance and 30 pF load capacitance.
-
LEDs8 mm LED with APA106 Chip – NEOPIXEL
€0.90excl. VAT€1.10incl. VATAt first glance it may look like an ordinary 8 mm RGB LED, but it is not!
-
Accessories8 mm Linear Bearing Mount – 2 pcs
€7.38excl. VAT€9.00incl. VATThis aluminium mount with an 8 mm linear bearing (inner diameter) and four partially threaded holes can be used in applications requiring precision linear motion, such as printers, plotters, CNC machines and similar
-
Accessories8 mm Shaft Wheel Coupler – 12 mm Hex
€1.23excl. VAT€1.50incl. VATWheel coupler complete with grub screw and screw, for 8 mm diameter motor shaft and wheel. Hex size: 12 mm, hex height: 5.5 mm, threaded hole diameter on hex side: 4 mm, diameter of cylindrical part: 11.5 mm, threaded hole diameter on cylindrical part: 3 mm, total length: 17.8 mm, weight: about 11.5 grams. Can be used in robotics, mechanics, etc.
-
Special functions -
Special test instruments8-Channel 24 MHz Logic Analyzer
€13.11excl. VAT€16.00incl. VATCompact 8-channel logic analyzer for testing and analysing digital circuits; it plugs into the PC’s USB port so the captured data can be studied in detail. Maximum sampling rate 24 MHz. It supports 10 different communication standards: CAN, DMX-512, I²C, I2S/PCM, Manchester, 1-Wire, Async Serial, Simple Parallel, SPI, UNI/O. Fully compatible with the Saleae Logic software.
-
Raspberry Pi8-Channel ADC Expansion Shield for Raspberry Pi
€13.52excl. VAT€16.50incl. VATExpansion shield module for Raspberry Pi, based on the 10-bit MCP3008 analogue-to-digital converter, which allows up to 8 input channels to be connected, each one on its own pin
-
Signal processing8-Channel I2C Multiplexer with TCA9548A Chipset
€3.11excl. VAT€3.80incl. VATThe 8-channel I2C multiplexer based on the TCA9548A chipset is designed to expand the number of I2C devices that can be connected to an I2C bus. With a choice of 8 different I2C addresses, from 0x70 to 0x77, you can control up to 64 I2C devices by adding further multiplexers.
-
Radio remote controls8-Channel Self-Learning Receiver – KIT
Price range: €69.00 through €85.00 incl. VATSelf-learning 8-channel 433MHz receiver compatible with Emylo remote controls. Up to 10 buttons can be learned for each channel. Monostable and bistable operation.