3-way DIP switch
€0.57excl. VAT€0.70incl. VATPCB-mount DIP switch, 3 ways, 6 pins, 2.54 mm pitch.
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
DIP switches -
Linux embeddedEnclosure for BeagleBoard-xM
€9.84excl. VAT€12.00incl. VATPlastic enclosure purpose-made and pre-drilled to house the BeagleBoard-xM
-
EnclosuresTEKAL21.29 Black Aluminium Enclosure
€11.89excl. VAT€14.50incl. VATExtruded aluminium enclosure with a high-quality external paint finish
-
EnclosuresTEKO TEKAL11.30 Aluminium Enclosure (WHITE)
€8.61excl. VAT€10.50incl. VATExtruded aluminium enclosure with a high-quality external paint finish
-
EnclosuresPlastic Enclosure 128x60x41
€13.93excl. VAT€17.00incl. VATImpact-resistant plastic enclosure with matt surfaces
-
EnclosuresTEKO SAL383 Metal Enclosure
€32.79excl. VAT€40.00incl. VATMetallised aluminium base and black lid held together by four screws; measures 153 x 160 x 70 mm.
-
EnclosuresTEKO SAL382 Metal Enclosure, 103x160x70
€27.87excl. VAT€34.00incl. VATMetallised aluminium base and black lid held together by four screws: they shield the circuit and take knocks.
-
EnclosuresTEKO PULT362 Plastic Enclosure 161x97x61
€7.79excl. VAT€9.50incl. VATSloping-front enclosure in grey plastic with aluminium top panel
-
Buttons, switches & joysticks4×4 telephone-style matrix keypad
€6.48excl. VAT€7.90incl. VAT4×4 matrix keypads with the buttons laid out to the telephone keypad standard
-
EnclosuresPlastic Enclosure 120x56x31 with Speaker Grille
€2.05excl. VAT€2.50incl. VATIt has a 33 x 26 mm grille in the lid, to let the sound of a buzzer or a small loudspeaker out.
-
EnclosuresPlastic Enclosure 35x58x16 mm
€1.23excl. VAT€1.50incl. VATBlack ABS box, 58 x 35 x 16 mm: the smallest of the range, for a board just a few centimetres across.
-
EnclosuresEnclosure 133x102x42
€8.61excl. VAT€10.50incl. VATABS enclosure made up of an upper part with a smoked window (102×48) pre-cut to take two 3 mm LEDs, and a lower part with closing holes and wall-mounting holes
-
EnclosuresTEKO P3 Plastic Enclosure 160x96x61
€7.79excl. VAT€9.50incl. VATGrey body with aluminium front panel and internal guides that let the board slide into place.
-
EnclosuresTEKO NE229 Plastic Enclosure
€18.44excl. VAT€22.50incl. VATComes with PCB guides and mounting points already in place; measures 218 x 141.5 x 62 mm.
-
EnclosuresPlastic Enclosure with Battery Compartment – 60x130x29
€2.05excl. VAT€2.50incl. VATBlack ABS box with a separate compartment for two AA cells or one 9 V battery, and about 93 x 54 x 22 mm left free for the board.
-
EnclosuresPlastic Enclosure 56 x 90 x 23
€1.56excl. VAT€1.90incl. VATBlack ABS box with roughly 86 x 53 x 18 mm of free space inside: the right size for a small board and its terminal block.
-
EnclosuresPlastic Enclosure 90x46x20
€6.39excl. VAT€7.80incl. VATTwo-shot moulded enclosures (ABS/PC and TPU)
-
EnclosuresPlastic enclosure 90x46x20
€6.39excl. VAT€7.80incl. VATTwo-shot moulded enclosures (ABS/PC and TPU)
-
EnclosuresTEKO DEC14 Enclosure – Black
€14.75excl. VAT€18.00incl. VATABS enclosure with matt surfaces, ventilation slots on both sides and two painted aluminium panels 1 mm thick
-
EnclosuresTEKO D12 Black Plastic Enclosure
€6.97excl. VAT€8.50incl. VATImpact-resistant plastic enclosure with matt surfaces and a translucent red plastic front panel sloped at 20°