6W NEUTRAL WHITE 12V DICHROIC LED LAMP – GU5.3 BASE
€3.93excl. VAT€4.80incl. VATPuts out 450 lumens at 4000 K with a beam wider than 110 degrees and lasts 25,000 hours: it replaces a 40 watt halogen.
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Light bulbs -
Light bulbs6W LED Lamp – 220Vac natural white, GU10 base
€2.38excl. VAT€2.90incl. VATLED lamp, natural white, GU10 base, 6W output.
-
Light bulbsSet of 3 natural white LED candle bulbs 220 VAC – E14 base – 5W
€4.02excl. VAT€4.90incl. VATPack of 3 LED candle bulbs with natural white light output, beam angle >270°, colour temperature 4000 K, E14 base, low power consumption and instant switch-on
-
Function generatorsArbitrary Waveform Generator – 2 Channels 25 MHz
€285.25excl. VAT€348.00incl. VATTwo-channel DDS generator: waveforms, pulses, functions, harmonics, frequency counter. 4.3″ LCD display, 300 MSa/s sampling, 25 MHz sine.
-
Oscilloscopes & dataloggersBench Oscilloscope, 2 Channels, 100 MHz
€227.87excl. VAT€278.00incl. VATHigh-performance bench oscilloscope
-
Oscilloscopes & dataloggersBench oscilloscope, 4 channels, 200 MHz
€508.20excl. VAT€620.00incl. VATHigh-performance bench oscilloscope
-
SolderingSn Cu Lead-Free Solder Wire 250 g – 1 mm
€31.97excl. VAT€39.00incl. VATSolder wire spool weighing 250 grams, with 1 mm diameter wire, “lead-free”, i.e. containing no lead
-
Mobile phone accessoriesUSB A Male to 8-pin Lightning Male Cable
€3.44excl. VAT€4.20incl. VATCable for Apple devices (iPad, iPod and iPhone) with a USB A male connector at one end and an 8-pin male Lightning connector at the other
-
Battery chargersUniversal charger for Ni-MH, Ni-Cd, Li-Ion, LiFePO4
€22.95excl. VAT€28.00incl. VATSmart battery charger with LCD display and audible alert, able to charge Ni-MH, Ni-Cd, Li-Ion and LiFePO4 batteries in the most common commercial sizes
-
Rechargeable batteriesLi-ion 18500 Battery 3.7V 1300mAh, Solder Tabs
€7.79excl. VAT€9.50incl. VATLi-Ion 18500 rechargeable cell, 3.7V 1300mAh, solder tabs
-
Test & measurementProfessional True RMS AC/DC Multimeter – Voltage, Current, Resistance and NCV Tester
€40.16excl. VAT€49.00incl. VATA compact, accurate digital multimeter, the DMT-99 gives you reliable readings of voltage, current, resistance, capacitance, frequency, continuity and much more.
Its colour TFT screen, auto-ranging and rechargeable battery make it ideal for electrical work, maintenance and fault-finding on installations or vehicles. -
Soldering2-Channel 150 W Soldering and Rework Station
€998.36excl. VAT€1,218.00incl. VAT2-channel 150 W soldering and rework station. The WT2023M set brings together the compact WT 2M station, the WTMP MS micro soldering iron and the WTMT MS desoldering micro tweezers. Active tip technology brings the tool up to working temperature in just 5 seconds, for work from nano to micro applications, with precision and in full ESD safety.
-
Soldering1-channel desoldering and rework station with tweezers
€648.36excl. VAT€791.00incl. VAT1-channel 95 W desoldering and rework kit with WT1M station and WTMT MS desoldering tweezers. The RTWMS active tips reach working temperature in about 5 seconds, for precise pick-up of SMD components. The system is ESD-safe and takes the supplied RTWMS 030 K tips.
-
Soldering1-Channel Digital Micro Soldering Station 95 W
€547.54excl. VAT€668.00incl. VAT1-channel digital micro soldering kit rated 95 W, with active-tip iron and safety rest. Thanks to RTM active-tip technology it reaches working temperature in just 5 seconds. Temperature is adjustable from 50 to 450 °C with an accuracy of ±9 °C, and the whole system is ESD-safe. The ideal choice for SMD micro soldering, board repair and bench-level technical service.
-
Soldering3 mm blade tips for desoldering micro tweezers
€82.79excl. VAT€101.00incl. VATPair of 3 mm active blade tips from the RTWMS series for the WTMT MS desoldering micro tweezers. With the heater built into the cartridge they reach working temperature in about 5 seconds. Ideal for SMD rework, they are supplied as standard with the WT2023M station.
-
Soldering1.3 mm active chisel tip for micro-soldering pencil
€31.97excl. VAT€39.00incl. VAT1.3 mm active chisel tip from the RTM series, for precision micro-soldering. Its built-in heating element brings it up to temperature in about 5 seconds. It fits the WTMP MS micro-soldering pencil of the WT1010M and WT2023M stations, where it is the tip supplied as standard.
-
SolderingRound soldering tip 0.8 mm – ET series
€6.56excl. VAT€8.00incl. VAT0.8 mm round soldering tip from the ET series, suited to precision soldering, fine-pitch SMD work and touch-ups. It fits the WEP70 iron of the WE1010 station.
-
Test & measurementDST210 3-in-1 Handheld Multimeter, Oscilloscope and Signal Generator
€72.95excl. VAT€89.00incl. VATThe DST210 is a handheld 3-in-1 instrument combining a true RMS multimeter, a 10 MHz oscilloscope and a signal generator, with a 2.8″ TFT display, a rechargeable battery and waveform logging.
Ideal for service work, R&D and bench use. -
Function generators10MHz Digital Oscilloscope with Built-in Signal Generator
€46.72excl. VAT€57.00incl. VATCompact 10MHz digital oscilloscope with built-in DDS signal generator (up to 50KHz), 2.8″ colour display, advanced triggers and rechargeable battery. All of it in the palm of your hand.
-
Test & measurementProfessional 3-in-1 MultiScope: 100 MHz Oscilloscope, 19,999-count Multimeter, 10 MHz Generator
€204.10excl. VAT€249.00incl. VATThe DSO2D15P is a multifunction bench instrument combining a dual-channel oscilloscope (up to 100 MHz), a 19,999-count True RMS multimeter and a signal generator up to 10 MHz.
With a 4.3″ touchscreen and physical controls, deep memory and advanced modes, it is ideal for laboratories, prototyping and professional testing.