VK2828 GPS Module with Antenna

Description

56-channel GPS receiver module with UBX-G7020-KT chipset, complete with ceramic antenna, TTL serial communication and NMEA0183 V3.0 data output format (GGA, GSA, GSV, RMC and VTG). Combined with Arduino or Raspberry Pi, it allows you to know the position of a robot (not indoors), of an object, or it can be used with a flight controller for multirotors. Power supply: from 3.3 VDC to 5 VDC.

Technical specifications

• Acceleration: < 4g
• Position update rate: 1 Hz – 10 Hz (default 1 Hz)
• Interface: TTL serial 3.3V, 4800-921600bps (default 9600)
• Data output: NMEA0183 V3.0 format (GGA, GSA, GSV, RMC and VTG)
• Consumption: approximately 30 mA at 5 VDC
• Pinout:
  – E: Enable pin. Activates the device when this pin is high, deactivates the device when it is low
  – G: GND
  – R: RX
  – T: TX
  – V: VCC
  – P: PPS – Time standard pulse output
• Operating temperature: from -40°C to +80°C
• Dimensions (mm): 28x28x8
• Weight: 15 grams