Narrow by category
Counts based on the first
4198 matches.
Showing 1–20 of 83 results
-
Lab cables
€2.38excl. VAT€2.90incl. VAT
Commonly used with 7.2 V sub-C battery packs, this 10 cm AWG cable is fitted with a female connector (sometimes called Tamiya or Kyosho) designed to prevent reverse polarity, with a latch that prevents it from coming loose from the male connector, and able to handle high DC currents
-
Lab cables
€2.87excl. VAT€3.50incl. VAT
Commonly used with 7.2 V sub-C battery packs, this 10 cm AWG lead carries a male connector (sometimes called Tamiya or Kyosho) shaped so that the polarity cannot be reversed, with a latch that stops it working loose, and able to carry high DC currents
-
Lab cables
€2.38excl. VAT€2.90incl. VAT
Commonly used with 7.2 V sub-C battery packs, this 10 cm AWG lead has a male connector (sometimes called Tamiya or Kyosho) shaped so that reverse polarity is impossible, with a latch that stops it unplugging from the female connector, and able to carry high DC currents
-
Lab cables
€2.87excl. VAT€3.50incl. VAT
Commonly used with 7.2 V sub-C battery packs, this 10 cm 18-AWG lead has a female mini connector (sometimes called a Tamiya or Kyosho) shaped so that the polarity cannot be reversed, with a catch that stops it pulling off the male connector, and it will carry high DC currents.
-
Lab cables
€3.69excl. VAT€4.50incl. VAT
Ribbon of 10 leads, 20 cm long, terminated with a 1-way male connector at one end and an alligator clip at the other
-
Lab cables
€3.69excl. VAT€4.50incl. VAT
Ribbon of 10 leads, 20 cm long, terminated with a 1-pole male connector at one end and a crocodile clip at the other
-
Lab cables
€2.05excl. VAT€2.50incl. VAT
Insulated stranded-core copper wire for wiring.
-
Lab cables
€1.89excl. VAT€2.30incl. VAT
Male Tamiya connector with tinned copper cable and PVC sheath, 14 cm, designed for currents up to 4A. Ideal for connecting batteries in model making, airsoft and low-voltage electronics.
-
Lab cables
€1.89excl. VAT€2.30incl. VAT
Tamiya female connector with a 14 cm tinned copper cable and PVC sheath, rated for currents up to 4A. Ideal for connecting batteries in model making, airsoft and low-voltage electronics.
-
Lab cables
€1.56excl. VAT€1.90incl. VAT
Two-wire lead with female JST connector, 2.54 mm pitch.
-
Accessories
€1.23excl. VAT€1.50incl. VAT
2-pole female connector with 20 cm long leads, 2.54 mm pitch, nylon 66 housing (UL94V-0), rated voltage 50 Vdc max, current 3 A max.
-
Lab cables
€0.66excl. VAT€0.80incl. VAT
Small cable with 4-pin, 2 mm pitch connector at each end, 20 cm long.
-
Lab cables
€1.64excl. VAT€2.00incl. VAT
Flat cable approximately 20 cm long, with a 2×20 pin male connector on one end and a 2×20 pin female connector on the other
-
Accessories
€1.31excl. VAT€1.60incl. VAT
3-way female connector with 20 cm leads, 2.54 mm pitch, nylon 66 housing (UL94V-0), rated voltage 50 Vdc max, current 3 A max.
-
Lab cables
€2.05excl. VAT€2.50incl. VAT
AWG28 3-wire lead (red, black and white) with a female JST ZH connector, 1.5 mm pitch, 30 cm long
-
micro:bit
€0.66excl. VAT€0.80incl. VAT
Standard 4-pin Grove cable with female connectors. Length 20 cm.
-
Lab cables
€2.87excl. VAT€3.50incl. VAT
Ribbon of 40 separable wires, 20 cm long, terminated at both ends with a 1-pin female connector on one side and a 1-pin female connector on the other
-
Lab cables
€2.87excl. VAT€3.50incl. VAT
Ribbon of 40 separable leads, 20 cm long, terminated with a 1-way female connector at one end and a 1-way male connector at the other
-
Lab cables
€2.87excl. VAT€3.50incl. VAT
Ribbon of 40 separable leads 20 cm long, fitted with a 1 pole male connector at one end and a 1 pole male connector at the other
-
Lab cables
€2.38excl. VAT€2.90incl. VAT
Ribbon cable about 40 cm long with a 2×20-pin male connector at one end and a 2×20-pin female connector at the other